[FOUND] Windshield fluid reservoir filler neck

I am looking for a windshield fluid reservoir filler neck for my 2003 Double Cab. It has a hole in it from the plastic being brittle and cracking.

If I don't find one, I'll start considering fixing it, but if you have one laying around from removing it for your aftermarket, high-clearance bumper, I could make use of it.

PM me with your price shipped to Oakland, CA 94610-4510.

 

https://www.tacomaworld.com/threads...trail-rig-and-bs.159436/page-398#post-8802626

https://www.tacomaworld.com/threads/put-in-this-cheap-easy-fix-for-window-washer-reservoir.310464/

https://www.tacomaworld.com/threads/diy-wiper-fluid-reservoir-relocation-for-1st-gen-tacomas.441906/

Here's some alternatives. There's at least one more that uses one from a kia that goes in the passenger side of the engine bay. If you're interested in these options at all, just post up in this thread about it and I'm sure you'll get some more detailed info:

https://www.tacomaworld.com/threads...tacoma-today-1st-gen-edition.138573/page-6853

The whole filler neck on mine broke off and I don't plan on replacing it with another one of the same design / materials - I'll probably go with the first link.

 

Thanks for the links! If it's easy and cheap, I'll replace the filler neck for now otherwise I'll leave it until it breaks off and I'll cap it with duct tape until I address it for real with a cheap solution. I've been waiting on relocating since I may just stick with a stock bumper instead of a high clearance one and need to relocate it.

 

I have a stock Tacoma non-cold weather spec windshield reservoir w/ motor and wiring pigtail for sale. It goes in the upper left hand engine bay where your ABS usually goes. The holes are already tapped in the engine bay for it.

It's a normal reservoir unlike the one with the filler neck which was for cold climates.

 

I have ABS and I'm keeping it. I also plan to do a dual battery at some point and on-board air, so ideally, I want to keep the stock location right now. In the case that I change my mind, do you have a photo of it in the engine bay, @BartMaster1234 ?

 

I've seen some guys with ABS fit it.

 

Yeah mine cracked and leaked all over my morimoto projectors last week. I got the neck and reservoir from advanced auto with a coupon for like 36 bucks shipped if you’re gonna go that route

 

I have a reservoir from a 2002 4runner that is in great condition if you are interested. Pm me.

Thanks,
Charlie

 

Is it the same as the 2001-2004 double cab tacoma one? I am only interested in the OEM filler neck right now. If I end up considering something that is not in the stock location, I'll buy a new one that fits where I decide to put it after I get on board air and other projects done.

 

I believe this is identical to what you have there currently.

_Charlie