On Board Air Compressor Mounted In Bed Storage Box?

Self plug but check my signature; I sell plastic covers that will covers the holes in the stock cubbies helping to stop water and debris from getting in. In case that's a need

 

Those are nice- thought about those too. Timely post!

 

Haha yeah just happened to found the thread and figured I had something useful to offer

 

Nice setup, including the batteries and fuse boxes. 1 question: what do the toyoservice people say when they open your hood, and how much of the truck does this mod void the electrical warranty? Do you know if your alternator will still be covered by it? Thanks- my truck is still low miles and warranty is still new...

 

Can you share some pics? I'm waiting for this to be delivered. Did you wire it up too? If so can you share some photos of that as well?

I'm concerned ARBs wiring harness will be in the cubby as well while I run the Red, Black and switch wire from the back to the front of the vehicle.

 

worth every penny... spend the extra $2 for the foam gasket as well

 

I'll try to get some pics this weekend, as I'm without my truck for a couple days.

I've got it wired on the compressor side, but haven't had time to wire it into my dash.

 

Thanks! The pics will be helpful.

 

I live in Baja Mexico and they pretty much void warrenty for the samllest reason here in mexico, My other Toyota's battery died and they voided the warrenty because i had a dash cam wired in

 

I finally did my write up.

https://www.tacomaworld.com/threads/arb-ckma-12-compressor-in-bed-box-of-2012-tacoma.532841/

 

There's a thread somewhere around here (and a YouTube) about a kit for putting a twin back there.