What Have You Done To Your 2nd Gen Tacoma Today?

Depends on the knife. Put a machete or a clever on here and you could have a bunch of serial killers chasing you around town.

 

Yeah we don't have that problem here in AZ. We are getting a hi around 80* almost everyday. I have a 20 mile drive each way.

 

thanks

 

Removed one of my aquariums headlights before getting caught in the rain. Seller is offering to reseal them but at this point I'm not even sure if I have confidence in them anymore.

Made a quick video on Instagram showing how much water was in the driver side: https://www.instagram.com/_tacomaholic/?hl=en

 

Yikes but I say give the guy a chance one more time to make things right . It sucks because it should’nt have happened in the first place

 

I thought id be cool and replace my turn signals wirh led bulbs now i have hyper flash any ideas?

 

Shunt resistor mod time!
...just make sure you take enough material off the first time.

 

Yeah ive searched but i could not find a good write up, i hate electrical so i need clear instructions.

 

I've read i can get a resistor from the auto parts store that would fix my problem. Where the hell do i install it? And i have the intermittent turn signal/running light mod so does that effect this scenario?

 

Here's my latest go at it: https://www.tacomaworld.com/threads...gen-tacoma-today.6499/page-7348#post-17095085

No electrical work though; just take it out, grind off material, then put it back.

 

Those suckers get HOT! That's why I didn't go that route.

 

Hmmm.... not sure whats all incolved there? I see some roughed up areas on i gess the resistor. Would you happen to have a before pick?

 

Not really done today but I installed Bilstein 5100 shocks with Toytec springs to level her out and a set of Aries nerf bars. Also got her detailed.

 

I looked at my toytec lift sitting in my mancave waiting to be installed... its quite depressing lol

 

Gettin the ultragauge em plus setup!




Seems pretty accurate for atf temp. Working on instant mpg/ miles to empty currently. Anyone know what temp to look out for on the atf before you're in the "danger zone"?

 

He's offering to reseal them but I can't trust that it won't happen again.

 

That’s crazy man my 285/75/16 St Maxx balanced first try. Dude who did it has done many mud terrains and such and recommended the weights be on the inner most part of the rim closest to the frame. Not sure if that’s why but maybe have them give that a shot.

 

The clear came off and the paint went with it. It just happened over the years, has gotten progressively worse.

 

Saw it too and am interested at face value but curious about anyone that has ran this set

 

On their website they have 2nd Gen Tacomas marked as years 2003-2015.