Switch Panel

I have a Access Cab so no power sliding window. I want to use that spot on the panel to install a switch for my spot lights. I haven't had the panel off in awhile so does anybody know if I can mount a vertical switch (same size as the Door Opener switch) in that position? I know I can get a plate for the cubby above but I'd like to fill the blank area on the panel for now. Thanks

 

Check out the thread I made:
https://www.tacomaworld.com/threads...e-driver-side-cubby-with-switch-panel.532943/

Maybe something there will give you an idea since it has pictures on what is behind the trim.

 

@mesojdm

 

I tagged you because I couldn't find that awesome graphic you put up for the 4 switch spot cubby

 

I'll pop the panel out later and see what's behind it in the area. Otherwise I'll get the plate to cover the cubby.

 

ahh ok. This one? I will be making a few

There is plenty of room behind that blank section. Getting a clean rectangle hole cut is another story.

 

I have a switch panel for sale, as well as a number of switches. I live just a bit away from you if you are interested. I will attach the image of the switch panel I have.

 

Mesojdm, I would be interested in one of those panels if your making some.

 

Me too!

 

Ooooh! More goodies. So this is a 4 holer instead of replacing the cubby?