Colorado B.S. Thread

Den Col was super busy today, they wouldn't cut my metal and said it would be done by noon.......

While i was checking out 5-6 other people came in to get some steel.....

 

I have seen replace their Radio's with it, not sure where they get the mount they slide it into.

 

You going for good or just a Work-A-Thon time period?

 

Oh yea, seen them for iPad. I’ve got an android tablet. Plan for it is Gaia and arps. The rest of the week it lives in semi

 

Quadruple Tiki Smash. Drunk post....

 

Anyone going to Cruise Moab or the FJ summit. I’ve never been to either.

 

Cheers

Liquor store's shipment was delayed several days and this was all they had left

 

Need you alls help. Which pad goes inboard and which goes outboard? I forgot to check when I pulled the old ones out and this is my first time doing this. Roast away!

 

Unless it's a wet vent (lav drain?) There shouldnt be any water in a vent to leak. More likely it just happens to be a hole that the water is running down.
Thanks to capilary action, small leaks can be tricky to find since the leak and the evidence can be far apart.

 

Don’t think it matters. Just don’t forget the brake clean

 

And the pad grease

 

Can someone link me to the 2nd gen torque spec guide? I can’t find it. Or alternatively what is the spec for the bolts that hold the calipers to the hubs?

 

https://www.tacomaworld.com/threads/the-torque-spec-guide.318116/
And keep your greasy finger off the front of those pads

 

Solid advice!

 

This doesn’t tell me how manny uggah dugags?!?

 

80ftlb

80ftlb
So gudentight!! 10 uggah dugags!

 

Nah, put the anti squeak on the pad surface to help break them in.

 

This guy

 

This^^
Had a leak in a house back in 2010. Water trickling into the living room from under the wall right where the hot water heater sits on the other side of that wall. Leak was coming from 20 feet across the room due to a pinhole in a pipe coming through the slab that wasn't sleeved. Just ran it's way down the bottom plate until it decided it found a place to come out.