yosh2000's build

finally feel like i have enough stuff done to create a thread. not into showing pics of the same stuff everyone else does, or calling stickers "mods", but i'll share a few of the unique ones or ones that i did myself, a true mod!

here is a somewhat "complete" list of the things that i have added that didnt come w/ the truck when i bought it used...

Interior:
- LED cluster
- FJ shifter
- custom industrial LED dome lights
- 3.5" Gentex mirror/monitor

Exterior:
- white grille and bumper, w/ tow hitch
- 09 tails
- OEM oil and trans cooler
- OEM 09+ tailgate camera
- Blue sea fusebox and milspec battery clamp upgrades

Lift:
- camburg spindles
- DR coilovers
- OME leafs and shocks

here is a pic showing the evolution of the lifting on my truck. stock, then 5100s @2.5" w/ TSB leafs, finally w/ camburg spindles, donahoes at ~1", OME leafs and rear shocks, TRD 07 SE wheels and nitto TG 285s.


Used, restored, DR coilovers, camburg spindles and very low mileage OEM UCAs.


LED cluster (i have since changed the headlight/cruise to red, much better!)


custom TRD intake cover (sold for URD intake)


FJ shifter (had to trim to fit)


TL retro (sold this though in prep for my gen 2 retro!)




TSB floormat mod


Custom industrial LED dome light...these things blow any and all other PNP bulbs out of the water! (search egay for: "fantastic wide view angle cluster 8")


Blue sea install w/ milspec battery clamps


others to follow as i find them....including the cockpit level controlled HID retro!!

 

Nice rig.

And thanks again for that spindle - you saved me on that one!

 

Lookin good Yosh! Love them Headlights man!

 

Intake looks great.

 

Nice build! I sure like them wheels!

 

where did you get the clear cover for trd air filter

 

^ i made it...search for "my $9 and 30 min mod"...

 

couldnt find it said no match in search box

 

great looking rig!

 

I was hoping you would make a build. Your truck looks good man. You just running the OME leafs, and shocks? How much higher in front are you?

 

couldnt find it in search box

 

dude, seriously couldnt find it....here...shoot i even got the title exactly the same as well!!

 

thanks i even cut and pasted the address in search and it wouldnot come up but got it now I apriciate it....

 

Nice truck...thinking about doing the LED and HID RETRO mods soon. IM in the soCAL area also.

 

Hi yosh just wanted to know how you got the shifter to stay on

 

how did you get the shifter to fit

 

i had to trim the two bottom pieces...make sure if you do some fitting, you check the fitment in the "1" position, because that is the place you have the least clearance. once you have clearance there, it just screws on just like any other shifter...

 

fixed and you know it!! got some pics for your spindle stickout...any word on those 4runner mirrors?!!

yea, working on that. dont want blocks, but like the amount of front lift...might add the extra load leaf for the OMEs.....

 

yeah thanks I new it screwed on just wasnt sure if you cut it or I thought about threading the inside of a piece of a steel collar and putting it the inside of handle but I figured out how to take it apart and trim it

 

Yosh Nice setup. Ive been thinking of going to a spindle setup with devers out back with fox shocks if I can find them.

I reap your area, I prob have seen you around before!

Cant miss my truck at all its all blacked out!