Anytime Front and Rear Camera Mod

The site is currently down for some maintenance and updates. My web guy has assured me that it will be up in the next day or so.

A 3rd camera is possible. I have already tested it. Expect to see it on the site as well. I don't install the nav override, but if you would like me to tag the wire and include instructions on how this is done, I can do that.

 

That works for me. I'm patiently waiting for the items to come up on the storefront

 

Buy this product the seller couldn't be more helpful. ask questions! watch the videos its simple

 

Wanting to grab a set but says product unavailable ?

 

Doing some maintenance on the site. I'll post here once it's back up.

 

Has anyone installed this switch for the nav over ride yet? If so did you just run it like you would a standard spst switch?

 

This is actually a SPDT, so you end up not using one of the terminals to get it to act like a SPST. I used a different brand a few pages back, that had 2 different switches in the same housing, one for camera and one for NAV. But, but the wiring is the same. I have attached a pic of how you would wire this switch. I have shown 2 options. First, so that the LED only comes on when you turn on the headlights and all the switch lights in the cab turn on. In this set up the LED is only so you can see the switch in the dark. I figure you will know immediately if NAV override is on and no need for an indicator light on your switch. Option 2, you could just leave off the LED power source and just wire in the NAV circuit. But the switch would always be dark, and depending on where you mount in, may be hard to find at night.



Edit: you can move the upper NAV wire From NO to the NC depending on which way you want the button, (in or out), when activated

 

Thank you very much!! I would have probably wired it wrong if you didn't show me the diagram.

 

You really can't do want you want with that type of switch. But you can get close with this switch.

uxcell 19mm 0.75in Mounting Thread Waterproof Press Switch Flat Round 2NO 2NC DPDT Latching Stainless Steel Metal Push Button Switch with Blue Light

https://www.amazon.com/uxcell-Mount...ncoding=UTF8&refRID=WQTFGR1GR1RX9XHSC114&th=1
Then you need to add an external indicator LED, either pre-wired,

120PCS 6 Color Ultra Bright 12v Pre Wired LED Diodes Light -White Red Blue Green Yellow Warm White

https://www.amazon.com/120PCS-Color...rd_wg=7B2CO&psc=1&refRID=DPRH1MQWKH3XX593QMFK
or hobby style with a housing

$7 Gikfun 5mm LED Light Assorted Kit DIY LEDs for Arduino (Pack of 100pcs) EK8437

https://www.amazon.com/dp/B01ER728F...NS&pd_rd_r=ETCTZ1ZZ5FX0X27H8J56&pd_rd_w=fiALa

$13 uxcell 50 Pieces Black Plastic 5mm LED Light Mounting Holders Panel

https://www.amazon.com/Uxcell-A1312...TF8&qid=1530490698&sr=8-7&keywords=LED+socket
and then wire it like this

EDIT: The Upper NAV wire should connect to NC1. I Have corrected the picture.

Or you could go with a rocker from OTRATTW. They show it listed in the wiring section of the site, but I can't find the product listing. Here it is listed by another vendor as well.
https://www.dirtyparts.com/store/detail.cfm/SWITCH-ON-ON-DPDT-BLU-BLU/pid-159248
if you wire it like this:

Edit: I originally posted the wrong switch picture here. The exiting NAV signal needs to attach to pin 1

$10 ATM Add-A-Fuse (Same Function as Bussmann BP/HHH) ATM Fuse Tap

https://www.amazon.com/Add-Fuse-same-function-Bussmann/dp/B007FFG5YI

The upper LED will illuminate with the dash lights etc. The bottom LED will Act as in "ON" indicator. You could then get a custom rocker switch from RockerSwitchPros like this.


You may have to reverse which LED is which depending on how you want the switch to be back lit

 

Tons of info to go over. Many thanks for taking the time to post it.

 

I'm happy to help when I can.

 

Logistics91, I sent you a message about a order

 

Sent you a response.

 

Here is my finished setup in my truck. I couldn't get a better mounting angle while keeping the camera 100% protected behind the grill, hence a small portion at the top of my display still showing the grill. I'm happy with it.
Many thanks to JJ for all the off hours/Sunday support.

 

Helo @Logistics91 can you send me install instruction y havent recive, thanks.

 

Juan, it was sent to your email address. I'll resend it.

 

Interested in the front kit. What kind of camera do I need to buy for it?

 

Your links are dead. They go to nothing. Are you still selling these? Would like the front view kit for my 2018 truck.

 

Website is currently down for maintenance and upgrades.

 

It doesn’t need to be screwed to anything. You can zip tie to the harness or any other cable management that you use/have.