Body lift for 3rd gen

I am new to TacoWorld and I am currently own a 2017 white trd i am looking for a body lift for my truck i have a 3" lift but i want to go a little higher with like a 2" body lift if anyone can help thank you!!

 

Here’s my best way to help.... don’t do it.

And fix your camber... it looks off.

 

not an expert but from what I have heard its a lot of work, better off with a suspension lift plus with body lifts you get a gap in between the frame and body..... Do your research-its your truck....do what makes you happy

I have a two inch spacer on mine. everything works great but wanted to go cheap for now until I can afford a 3-4 inch suspension lift....
I am not supper exited about cutting my cross member on a brand new truck for 4in and above....

PS what size wheels and tires and brand on both, upload some pics if you can.....

 

If your going todo a bodylift, recommend 4crawler. Oversized pucks and upgradable hardware.

http://4crawler.com/4x4/ForSale/ToyotaTacoma.shtml#Tacoma4

 

Thank you and am running 285/55/r20 with a -24 offset

 

That’s an interesting bull bar. Did you fab that yourself?

EDIT: also, welcome!

 

Thank you and it is a ranch hand brushguard the color is orginally black but i had sent it to get color matched with the truck.

 

Thank you @strktly_bodysurf i have 285/55/r20s and it rubbs on the frame where the cabmount is at and i dont want to cut it off i would rather get a body lift.

 

unfortunately a body lift won't move the cab mount https://www.tacomaworld.com/threads/3rd-gen-2016-cab-mount-chop-plates.399153/

 

I wouldn't recommend anything over 1" for a body lift. Too much relocation after that threshold. Even with 1" you'll have to drop radiator, raise bumpers due to gap, extend ground wire and filler neck on gas tank, spacer on steering column....... i went there with my current FJC. On the plus side you wont have to do a BMC. or at least i didn't to run 35s of the FJ, but they are pizza cutter tires.....