URD Short Throw Problem...Answers?

Just Installed the kit the other day. First go around wasn't seated all the way. Took it back out got to go down some more. Now it's hard to get into 1st and a have to LIFT up on the shifter to get it into reverse!?!?!? Can anyway help me out with a solution or a who to talk to at URD.

 

2nd gen?

 

Yeah.

 

Gadget. Call URD. Choose service.

 

x2 Call Gadget at URD.

The shifter extension should fit completely over the spacers. If not, then that might be your problem. Some of the shifters have a slightly larger diameter which will cause the extension to not fit over the spacers.

 

Sounds like you have the same problem myself and others have had. An oversized shifter shaft. Check out my thread in the URD forum about how I fixed it. http://www.tacomaworld.com/forum/un...-short-shifter-install-08-2-7l-prerunner.html

 

^^ There's the thread I was thinking of

 

Called Gadget and was a big help... Got it all sorted out and everything working great. Every Tacoma owner needs one of these!