What Have You Done To Your 3rd Gen Today?

Washed it and prepped my wheels to post up for sale!

 

RTT= Roof Top Tent
Bed stiffeners are when you mount the tent over your bed and the stiffeners keep the bed together with the extra weight added up top.

 

Bed stiffeners keep the bedsides from spreading under load from something like a camper shell.
RTT=Roof Top Tent

 

@Kbran24 Beat me to it

 

Looks great. I love mine too

 

Looks great!

 

Welcome! What these guys said.

 

Awesome, thanks

 

Sure I'm late on this, Roof Top Tent.
Welcome to TW!

 

Here are the new kicks! TRD Pro Rims wrapped in 265/70/17 Goodyear Wranglers

 

Hey @Theshortbusmafia,

What tire size are you running?

 

Received and Installed my radio knobs from @Tacowiede. It is amazing how such a simple thing could be such a great and usable upgrade.

 

Shrockworks sliders installed.

 

Had to throw the pumpkin in there lol

 

finally found the time to continue the saga of my truck

@Canyonero was paying it forward and send me his two roof weather strip moulding strips free of charge from the Islands of Hawaii to VA. Finally found the time to reinstall them today:




HUGE THANKS AGAIN TO CANYONERO FOR HELPING A BROTHER OUT!

Also decided to go ahead and install a homelink interior mirror sourced on ebay with the 10pin connector. Truck came stock with autodimming and 12 pin.


Installation is fairly straight forward and took some patients and a little bit of tinkering. Do yourself a favor and get the release tools:


The mirror ordered was 60$ on ebay:


Stock 12pin auto dimming pin out is shown here:


Homelink 10pin is here:


For people searching the interior rearview mirror wire colors below is a chart which I was never able to find on the boards here:

Original 12pin | Homelink 10pin | Wire color
3 Ground | 3 or 8 | Black/White
6 12v ignition | 6 | Pink/Red
10 12v constant | 10 | Blue

You will need to slide down the white color square retention block on the connector after releasing it from the mirror to pull the connector cables out. Use the pin release tools in the smallest connector holes to release the pin. Then pull HARD to release; pulling out one pin and reinserting it into the other connector so you only have one cable exposed. You can do this with the battery connected or disconnect the battery and do all three at the same time.


Existing auto dimming 12 pin connector


12pin and 10pin side by side


The "block" shown in both connectors that hold the cable connectors inside the housing. Left white rectangular will need to pushed down by like 2mm and both sides to release the connector once the pin release tool is inserted.


Release tool pushed all the way in

Swap your wires with the above chart plug in your replacement mirror and enjoy the savings knowing that you didn't have to spend 140$ on a plug and play mirror. Remember that the smooth side of the cable connector always goes with it facing up.


Next project will be to install the stock Tacoma Sport front diffuser

 

Who did you buy them from?

 

I got my new boot and shifter installed! I’m really happy with the look and feel, it’s a nice upgrade.

 

dang look at that sexy coin box

 

Where did you get the boot and shifter knob? Looks awesome man!!!

 

Just the wheels.