Glove box light

I'm thinking of adding a glove box light and am searching for constant 12v. I've seen that a lot of other people run power from the fuse panel and I don't feel like running it from over there. So does anyone know constant 12v near the glove box? Thanks in advance! Also this is for a 2015 Tacoma.

 

@flyzeye designs
http://www.flyzeye-designs.com/

 

I've seen those but I already have the led strip I just need power. I suppose I can ask @flyzeye designs to see if they know. Thanks!

 

The easiest might in fact be the add a fuse.
Then maybe add something like this if you feel like getting crafty so it isn't on all the time.

$11 uxcell Refrigerator Door Light Switch (2 Piece)

http://www.amazon.com/Refrigerator-...693893&sr=8-9&keywords=momentary+light+switch

 

Keep It Simple. No hard wire needed. No switch needed. https://www.mrbeams.com/mb702-mr-beams-wireless-motion-sensor-led-mini-stick-anywhere-lights

 

Been a couple of years for this thread.... I am sure he figured it out by now, but good looking out.

 

Useful to others doing a search on Glove Box Lights (like me!)

 

I was wondering why so many glove box light threads popped up today. He's bumping them all with the same info.

 

Huh, never considered a light there but older cars used to have them. Thanks for bringing this topic up

 

Cool.

 

Old threat and even older write up, but did this write up years ago.

Uses a push off switch so it only comes on when open. Tied it into the vehicle interior lighting. It was on my gen2 at the time but same concept with any vehicle.

https://www.tacomaworld.com/threads/center-console-glove-box-light-auto-on-off-when-opened.165008/