What Have You Done To Your 3rd Gen Today?

What’s the name, part number. Need one for my taco

 

Very nice setup

 

Check this one out:

$99 EGR 305085 SuperGuard Hood Guard Bug Deflector Protector, Matte Black Finish, Compatible with Select 2016 to 2023 Toyota Tacoma All Cabs Models

https://www.amazon.com/gp/product/B01N0T8Y48/ref=ppx_yo_dt_b_asin_title_o02__o00_s00?ie=UTF8&psc=1

I bought it for mine and absolutely love it. I searched and searched for the right one and couldn't be happier with my purchase.

 

Trying them now. Had them on my truck since Jan. 9th.

 

Cheapest I have found one is Amazon.

$120 Auto Ventshade [AVS] Aeroskin II Hood Protector | Fits 2016 - 2023 Toyota Tacoma | Low Profile Deflector / Bug Shield - 1 pc., Textured Black | 436079

https://www.amazon.com/dp/B01H3R5S4...olid=37S7Q81SMUM6W&psc=0&ref_=lv_ov_lig_dp_it

 

Damn I guess I won’t be riding truckee bike park anytime soon

 

One of the best mods in my opinion

 

Removed the ranchhand and installed some Baja design fogs I painted to
Match!

 

GA6

Only bike I'm gonna be riding is a stationary, best skiing in years and I got a bum knee, MRI next week.

 

Installed 3inch front spacer, 2 inch rear block, diff drip & skid drop.. also did the led light conversion for 90 % of the bulbs on my truck.

 

Pics kinda trash

 

Went to work and got the mail

 

remgu2000
What aftermarket mud flaps did you install?

 

installed my CBI T3 front bumper, with a Warn winch inside. An involved day of work including my first two angle grinds .

before...


after


now I need to increase the preload a little on the front to make up for the increased weight

 

Rokblokz in XL size. They fit great with my 285/70/17 tires with 1-1/4" spacers great. They really are way too pricey but I had them in my Amazon cart for over a year until the price did not seem as much.

Install post link below:
https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-5693#post-19759829

 

For sure. Easily the most practical I’ve done so far. I’m in my truck in the dark 90% of the time and the factory map lights where horrible.

 

Did my first rookie mod today! Replaced those yellow halogen fog lights with some LED’s. $25, can’t go wrong!

Took about 15-20 minutes after watching this video: https://youtu.be/FiHVLDOiiW4

Hardest part was buttoning up everything after changing the bulbs!

 

Hey guys! Need some good advice.. My 2017 Tacoma DCLB TRD Sport is currently sitting on the stock suspension. What do you guys recommend I do for a 2.5-3" raise and have a good suspension? My buddy put OME on his FJ60 Land Cruiser and recommends it. What experiences do you guys have? Would I have to swap my upper control arms too for only a 2.5-3" lift, or will I be fine with just the shocks, front springs, and leaf-springs? Not trying to run my wallet empty here, trying to stay within the $1000 range (or less), but I would rather spend a bit more on a better suspension. Specific links would be greatly appreciated. Also, what tire size would you guys recommend after I do the 2.5-3" lift without rubbing? Thank you guys!

 

OME is a quality budget lift. UCA are not always needed but may make the alignment and tire fitment easier. Most folks will go to a 285/70r17 or 285/75r16 with that lift. You could also go with a skinny 255/80, 255/85 tire but the selection is small.

 

I installed an OME lift with the 90021 soft ride nitrocharger shocks, 887 coils, and a Deaver aal. It cost under $1K and got me about 2.5" front and 2" rear, no UCAs needed. It aligned great afterwards.