What Have You Done To Your 3rd Gen Today?

So much for being done for awhile. Hahahahhaha

 

I'm in no rush, but I have specific questions before I can do anything. I was looking at the Aug/Sept timeframe.

I can live with the restarting it everytime I turn the truck on, but it is getting pretty frustrating at this point

 

Love the work @no vtec 4me did on my headlights! BHLM plus rx350 retrofit. I'll try and get a photo of the output/cutoff, a big improvement over the stock projectors.

 

sorry I pointed it out. I never even noticed mine was off and needed adjusting until I read some other guy on this forum talking about it. Then I looked at mine...Good luck with the fix!

 

I'm not even going to point out the poor hood to fender alignment on the blue truck....

 

that looks awesome!!

 

I just noticed that as well, prompted me to run out of my office in quite a panic and look at mine.

 

Are you talking about above the headlight where it's not even between the bottom of the hood and fender? Pretty sure it's designed that way.

 

looks bad in the pic, guess I'll have to look at mine closer.

 

It looks like mine lines up pretty well.

 

Check out some of the photos on this thread. You can see most of them have that gap above the headlight. I've never noticed it before until I took the photos today.

https://www.tacomaworld.com/threads/retrofit-and-bhlm-headlights.565466/

 

yes it does, your right, I was actually talking about how the Hood aligns up with the fender.


Love your lights though, is there a thread on doing this mod?

 

those fogs look nice, are you happy with them?

 

Used my recovery tracks haha

 

Cracked my windshield... But got new wheels/tires. You win some you lose some.

 

Just need to order the Wildpeaks...

 

Received my switch panel from @mesojdm and already mocked it up with three additional switches, i.e. seat heater switches and zombie lights and 3.0 USB ports with built-in volt meter. Just waiting for the weather to turn nice so I can rip out the consoles and start wiring. Here's sneak preview.


Seat heaters from https://www.amazon.com/dp/B01MEE6KLX/ref=cfb_at_prodpg that go with the switches above.

 

Look to be Baja Designs

 

Those look like the same carbon fiber seat heaters I had in my 2nd Gen that I just sold, had them in there for 2 years, loved them!!!

 

Also received my TRD Pro OEM wheels from https://www.toyotapartsdeal.com/
these wheels are awesome, can't wait to have them installed. I haven't made a decision on tires as yet but very close to.