Retrofit and BHLM Headlights

I figure its about time to consolidate all of my info and pricing into one thread, and list what i currently have in stock. I offer retrofit headlights, standard BHLM's and a few custom options for OEM LED DRL headlights. I work on an exchange system; I have lights I keep in stock that I modify and then sell for $xxx + your stock lights. All of the prices below include shipping to you, you are responsible for the return shipping of your stock lights. Lights will be shipped to you first so you can install them before shipping your stock lights back to avoid any down time with the truck. If you would like to send your lights in to be modified, that can be done as well. All prices would be the same. I only ship within the country, and prices only include shipping to the lower 48. AK/HI will be charged the additional actual cost.

Standard BHLM: $320
- All bezels painted satin black
- Sidemarker can be tinted or left amber
- All original sealant is removed and replaced with retrorubber for a factory-like seal

Retrofit: $920
-Standard BHLM
-rx350 projectors, tuned by TRS w/ clear lens upgrade
-morimoto 5500k bulbs, 35w ballasts, relay harness
-high beam splitter (projector & stock high beams are functional)
-100% plug and play

Options:
-Diode Dynamics switchback drl--$160
-Profile Pivot Halos (white or switchback)--$100
-Amber or Smoked acrylic turn signal cover--$50
-Custom etched lenses--$50-$100
-Diode Dynamics RGBW Demon Eyes w/ bluetooth controller--$170
-Meso Sidemarkers--parts+$30 (For pricing and availability check mesocustoms.com)
-Meso color matched headlight trim plates ( https://mesocustoms.com/collections.../headlight-trim-plates?variant=13239308288113 )--$45

Below are a few pictures of lights I've done showing a few of the different configurations you can do. If there is anything else you have in mind, feel free to message me and we'll see what can be done.



***PACKAGING INSTRUCTIONS***

I have been having issues lately with receiving poorly packaged and damaged lights back from people. I understand this may happen, but i want to help make sure everything is done to avoid it. I ask everyone to try to package their lights exactly as i have them packaged so here is two simple pictures to show what i do. First I lay the bubble wrap on the bottom of the box, and drop the light in lens down. I center it in the box. (also note the bulb holes covered with tape)


I then start stuffing paper packing material TIGHTLY around the light, keeping all parts of the light off of the sides of the box. Everything needs to be protected by the paper. By the time you finish this stage the light should be firmly planted in the box, it really shouldn't be able to move side to side at all.


At this point it's just filling in the rest of the box with the packing paper. When it is packed correctly you can pick the box up and shake it and nothing inside should move at all.

***INSTALLATION***

This write up from c4 fab is great to follow for bumper removal. That is 99% of what you need to do to remove the lights.

https://www.tacomaworld.com/threads...ont-winch-bumper-install-instructions.446516/

For the retrofit guys, here is a great video from lightwerkz showing how to align your new projectors. The adjustment bolt on our lights is the silver 8mm bolt on the back of the light right next to the drl harness plug.

https://www.youtube.com/watch?v=NNAfM4ymMsU

 

Interested in standard BHLM + Diode Dynamic DRL Switchback

 

really intrested in the BHLM! id like a white halo ring around my stock projector bezel that i could tap into my DTRL also. good price

 

Messaged!^^

 

Will you do a white out headlight mod..
I have a white taco and like a all white headlight.

 

Is bumper removal necessary? I’m always worried to do that bc it might not line back up perfectly.

 

If that’s what you want, I sure can

 

Yes 100% necessary. My bumpers been off probably 20 times and still snaps back into place perfect!

 

makes me anxious lol

 

You’ll be fine haha I can walk you through the install

 

Bump. Still sitting on a complete retrofit set. Also have a standard BHLM that will be ready early next week if anyone is thinking about it!

 

Does the standard BHLM include smoked side lens as well?

 

Yes

 

PM'd

 

Only set left in stock is the retrofit set. No one wants a serious lighting upgrade?!

 

I want a set exactly like this.

 

Really wanting, but still saving money.

 

what is your turn around time plus shipping?

 

What does bhlm stand for/mean?