What Have You Done To Your 2nd Gen Tacoma Today?

It just unscrews off, and this one screws on. Easy peasy!

 

Thanks.

 

I'm assuming you mean 275/70/17 and not 16? Thats what i'm looking at going to. Mounting on the basic FJ steel wheels for a "utilitarian" look and more offset.

 

Prinsu up

And still fits in the garage! #winning

 

nope. i meant 16's im running 3rd gen Off Road wheels.

 

pop 0p00 and

What's you spare tire setup in your bed?

 

I was going to say that you could just drill through both. But depending on where they go under the frame they may not interfere.

 

I for one will never modify, hack up, or drill through the factory frame that's insanity

 

You're at your limit then. Unless you want to cut, then you can fit up to 37s.

 

DARN TRUCK! I can never get this thing in Park no matter how hard I pull on this lever.
Must be something wrong with it!

 

Don't forget the dashing 5.11 "fishing vest" that was all the rage for a while!

 

I like the retro look

 

ahhh ok i see that the KO2's come in that size. I was looking at either Wildpeaks or Cooper S/T Maxx which don't come in 275 on a 16" wheel, so thats why i was confused

 

From what I have read if you dont off road you can run 33s as long as you keep it mostly asphalt and dont turn super hard going over bumps. Otherwise a common size is 265/75r16 (31" tire). Better than 33s for MPG but still enough tire to do some mild stuff with no rubbing. Add a spacer and it will only rub on easily removable plastics. Which is what I currently run, 265/75r16 with 1.25" spacer.

 

265/75r16 is a 32

 

https://www.tacomaworld.com/threads/diy-bed-mount-spare-tire-bottle-jack-all-in-one.588170/

Holds like a champ even when I’m chasing jeeps all over the place.

 

Did you know that everything needed to change an axle fits under the back seat including the axle?

-CV axle
-pry bar
-35mm socket
-both axle seals (r & l)
-breaker bar

 

i do a lot of rock climbing and camping which involves at least some mild off road at times. i would definitely be up for 1.25" spacers i was checking out your build thread and i like your stance with the spacers.

 

I added a little old school flair to my tailgate with this subtle matte black ( T O Y O T A ) decal. I took off all four chrome badges, then I did a 2-step paint correction on the tail gate & added the decal followed by a couple coats of sealant then wax. Turned out great, I think! The decal is from eBay, Very easy to find.

 

to late lol