What Have You Done To Your 2nd Gen Tacoma Today?

It is just the pads shifting up and down. Going forward, pads grab the rotor and clunk up. Going reverse, pads grab the rotor and clunk down. Over bumps they slop up and down just due to inertia. I could grab the pads and wiggle them up and down and hear the clunk. No more clunks now.


This pic is missing a set of guide pins but here are the parts I used.

 

Thank you!

 

I found a guy on Etsy that prints them for ~$35. The 4Runner badge works on 2nd gen sport grilles.

 

Fixed up the ol skid plate and topped it off with some bed liner also touched up the rear bumper trim with some bed liner. Like how it turned out

 

I may need to do the speaker thing.

 

Drove to Michigan with a buddy to pick up my 240z and 280z.

 

sorry, guys, just seeing this.

i had the LED's swapped out a long time ago.
a member on here did them. (can't remember who, sorry)

 

You getting vibration issues? Im about to do the same to mine, after45 mph the vibration is horrible

 

This is a "feature" of floating brake pads, the older the pads get the more they move because they aren't as tight on the pins and create slop from repeated floating back and forth. This is a common sound on Tacomas when flipping from forward to reverse or vise versa.

 

I went from soft to hard.

Softopper to an ARE.

 

That's a good looking truck! Te 3rd gen wheels look great on that and so does the black cap

 

https://www.tacomaworld.com/threads/new-recall-drive-shaft-replacement.523004/page-20#post-20185113 May can get them replaced for free? Had mine checked their good

 

I’m trying to talk myself into a shell you like it?

 

Thanks man! Kinda sticking to a silver and black theme. Couldn’t pass on the canopy- found it online for $300 and snagged it just in time!

 

So far, yes. It locks which is a huge plus, and I already have the rear suspension for the additional weight so I’m good there too. And my wife doesn’t hate it so there’s that too.

 

This exactly what I'm experiencing. I figured it was brakes since it only happens once each way after shifting. Thanks! Looks like I'll add it to the maintenance list.

 

Infinity Kappa 6.5" components.

Infinity Kappa 60.11CS 6.5" Car Audio 2-Way Component System

https://smile.amazon.com/gp/product/B00DH2XYSI/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

I worked in car audio for a few years and really came to love the Kappa series. Plus they're 2ohm which means i'll be getting the most out of the amp i'm putting in soon for these guys. They really need to be properly amped and not run off the head unit. Im using these adapters as well for the front doors:

$42 Front Door Speaker Adapter Spacer Rings Fits 2002-2011 Camry & 2005-2015 Tacoma - SAK010_551-1 Pair

https://smile.amazon.com/gp/product/B01D0XFM88/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

$18 Speaker Adapters for Tweeters Fits Lexus, Fits Subaru, and - 1.25" Cutout - SAK009_125-1 Pair

https://smile.amazon.com/gp/product/B01BLMBHPW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

 

Got my friend with a lathe to make me a custom shifter knob.... I like bikes

 

Hooked up a small 4x8 trailer to move a friend down to Charlottesville VA from Akron Ohio this weekend. 800lbs empty and probably put in another 400lbs worth of stuff. Pulled really easy on the highway and managed 16.5 on the first tank and 16.25 on the second tank. Not too shabby going through hills.

 

How did you cut your lines without cutting the paint under it? Curios.