GA Tacoma Owners BS Thread

did this sell? If not, PM me

 

Wanted to give everyone a heads up about a range day happening this weekend. All of the details are over here https://www.tacomaworld.com/threads/ga-weekly-getting-outdoors.596215/page-15#post-20881128

Will probably grill out potluck style afterwards.

 

As I mentioned, the Super Duke was sold, to make way for the 500 build.
Step 1 - remove all bs.
Step 2 - Install shit ton o’ parts.
Step 3 - Get ready to rip!

This is gonna be sick!

 

Posted in the other thread but wouldn't hurt to double post. Possibly going camping with @Gilmorec61 and some others on the Chattooga River in Clayton this weekend if anybody wants to join

 

I’m down

 

I'm pretty sure you've been to the spot right? I'm heading up right after work from Alpharetta and Chris is heading up from Vinnings. If my buddies come they'd be from Canton and Suwanee area

 

What time? I might be able to come in early. May have my trailer by then.

 

I'm probably heading out around 4:30 ish

 

Good info, however, I found Toyota pads, rotors, calipers, and hardware kit on Amazon. Im going to inspect the calipers before I replace them. They might just be gummed up with dust. Ill definitely go the Rock Auto route if they have to be replaced.They're pretty steep from Toyota.

On another note, I did score some 5100's for the rear. Now I got them all the way around. Picked up some rock lights I'm going to wire for courtesy, bed, and aux b/u lights... Then(bring on the bashing), I ordered 1¼" spacers.... They sent 1½". I install them when I do the brakes and lights. Other than that, I did wire my dash cam into the source in the roof for key switch operation. The wiring runs from the mirror mount so it turned out really clean.

Y'all be good.

 

If your truck has a significant amount of miles, I would just rebuild the calipers and do new lines. Did it on another vehicle and it made a giant difference even without new rotors and pads. I think rock auto sells just the calipers and then you send your cores back.

 

If any of y'all need cabinets for your garage, my company is clearing out space in the warehouse. I've picked up 4 of these so far and they are worth their weight! I'm about to be able to get my truck in the garage again.

$50 each and located in Norcross.

 

If only I had a damn house already I'd go pick some up after work

 

Are those metal? What size are they?

 

19" deep x 38" wide x 38.5" tall

Made of Steel and fairly heavy. Very sturdy.

 

Can confirm! Went there yesterday during lunch. Been open a few weeks and they're currently having a GREAT sale leading up to the 4th of July. Prices match what are listed online. Landed a 750ml bottle for the wife's wine, a 36oz bottle, a sport lid for it, and a 30oz tumbler for $43. Soft side coolers are ~50% off currently. Tons of lunch boxes, coolers, etc.

 

Thought I would share my build thread with you all. @CowboyTaco got me going so I updated it.

Built2Ride ‘17 TRD Pro Tacoma Build
https://www.tacomaworld.com/threads/built2ride-‘17-trd-pro-tacoma-build.577430/page-5#post-20906910

 

@Built2Ride,
Saw this and your name just popped in my head..

https://atlanta.craigslist.org/atl/cto/d/suwanee-1985-fj60-land-cruiser-ome-lift/6914430736.html

 

I do like me some LCs. I have owned a couple wagons. Getting harder to find parts for these guys.
I am getting another LC, but it will be a
200 series. Most likely an ‘08.

 

Gonna be a long 6 hours of work....