What Have You Done To Your 3rd Gen Today?

Gotcha', thanks...

 

looks good, i was thinking something like a TRD black frame

 

Me too

 

Dipped and Sticked today, had to look sharp for the highway.

 

Thx. It is mostly cosmetic and blends right into the non-painted portion of the bumper.

 

I just wanna' give @PNW-4-Life a big THANK YOU!

I've always despised those yellow decals on the visors. I didn't think there was any way they were coming off, so I was looking into getting the visors re-covered. I got one quote for $150.

I read this post a while back and finally gave it a try: https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-6396#post-20965793

Super easy! Here's the outside passenger side:



I think that last vestige of stupid decal is fading of the surrounding fabric.

All I did was follow PNW-4-Life's directions. Only thing I can add is that if the decal isn't coming off relatively easy, you need to apply more heat.

I could not get the "labels" off the backs of the mirrors. They appear to be printed directly on the plastic. I could be wrong. No worries, those I don't mind masking over.

Best-est mod so far! (...and the cheapest)

I have never used the dancing banana before... but I guess it has come to this:

 

I have the stealth flux capacitor.

 

Great looking grille, that won't be for sale very long.

 

Yesterday, installed the MESO Ultimate Map & Dome lights. Now before I go on my Caribbean vacation in January, I’ll know where to get my bronze on. Applying SPF50 is now a must. Thanks @MESO

 

The eagle has landed

 

Had my front diff actuator replaced! Just one little water crossing and couple hours later 4 wheel drive wont engage and have a flashing green 4x4 light. Found out there is a small breather hose that connects to the actuator came apart at some point. Its been about a month since this happened this is what the inside of the actuator looks like.


Installed a new unit and everything works great!

 

Diamonback! THE SNAKE HAS LANDED!

 

Very limited edition mirrors packed with Meso's design, V4 turns, puddle pods/lights and Rigid flood/ditch lights completed and tested. Going to a good home.

 

looks great... then you hit the brakes and eat your dash!

 

Saw your original thread about this-
https://www.tacomaworld.com/threads/3rd-gen-front-diff-actuator-problems.620309/page-2#post-21292564
does the case o-ring look good enough after sealing it for water crossings (not counting your breather issues)?

Also, how did you get the actuator out to replace it? Was it like in the 2nd Gen video you mentioned and how long did it take? Can’t believe what the stealership told you!

 

Holy Moley!

 

Wish it was my home, those are nice!

 

Tagged my gear box properly tonight: