All sold - thanks TacomaWorld!

All sold - thanks TacomaWorld!

 

Didn’t want the 3rd brake light? That 5 row is the best! GLWS

 

You make the very best products (pretty sure I have all of them haha) - just realized I'll be trading in the truck sooner than I imagined so no point continuing with the uninstalled upgrades.

 

I'll take the MESO 3rd and 3 Red 2 White BD Lights - 450 shipped. PM sent.

 

PM sent!

 

SOLD!!

 

Dang! Nice buy! I was second in line!

 

Thanks, I've been waiting for a long time for this.

 

Hoping meso releases them again soon! are you going to be installing it? That’s my only worry is installing it right so no leaks come through I know you have to drop the headliner.

 

Can I buy the panel by itself? If so I'll take it.

 

I’d take the others if you go that route and split.

 

Actually yes I will install it myself. The headliner doesn't need to be dropped, the removal of the existing light and installation is done from outside the cabin. Dropping the headliner is the hard way. All you need to remove the 3rd light lens, (carefully pry it off) then drill the plastic housing just enough to expose the bolts holding it in place and simply unscrew them to remove the base and unplug the power connector. It's fairly simple to do, there are quite a few threads explaining the process with pictures.

Just found this wiring info:

white/blk- ground
Green-Cargo
Purple-Brake

The following was from:
@Ronzio https://www.tacomaworld.com/threads/super-ultimate-3rd-brake-light-build.522181/page-137

"I used a 1/2 drill bit here...it was just big enough to free the metal bolts from the plastic...came right off and cleaned up nice. No need to drop the headliner and disturb the wires that are glued into it if you have a powered sunroof."

 

What panel are you talking about?

I have a fully built Pelfrey bussman.
An untouched Pelfrey bussman.
A Pelfrey Blue Seas that was part of the package deal? (Thinking this one but just trying to make sure).

You mean you would take the power cables, the blue seas panel and the breaker?

 

Yes the Blue Seas panel, sorry, I should have been more specific. I already have the relay and fuse block, just need a panel. If you don't want to split it up no big deal, just figured I ask.

 

All sold.

 

Admittedly I must have misread. I was looking for the components. (Fuse panel, breaker, etc.) not the metal panel itself. I have a manual so have to go my own route. Those all look sold, so I will keep looking. Thanks!

 

Here's the thread I was telling you about, scroll down the page and you'll find it.
https://www.tacomaworld.com/threads/super-ultimate-3rd-brake-light-build.522181/page-137

The following was from:
@Ronzio

https://www.tacomaworld.com/threads/super-ultimate-3rd-brake-light-build.522181/page-137

"I used a 1/2 drill bit here...it was just big enough to free the metal bolts from the plastic...came right off and cleaned up nice. No need to drop the headliner and disturb the wires that are glued into it if you have a powered sunroof."







Here's how to remove the lens:

 

Thank you so much!!