What Have You Done To Your 2nd Gen Tacoma Today?

I use this:

$20 Car Cup Holder Phone Mount, Phone Holder Mount Cradle Universal Adjustable Compatible for Apple iPhone, Samsung Galaxy, Moto, Google Pixel Smartphones

https://www.amazon.com/Cellet-Holder-iPhone-Samsung-Galaxy/dp/B0771WL7SP/ref=sr_1_2_sspa?crid=GHGHBZIAHGD8&keywords=cellet+phone+holder&qid=1571732044&sprefix=cellet%2Caps%2C147&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVjVCUVJQSEZRSFY0JmVuY3J5cHRlZElkPUEwMzU2MjUxMVg5M1FXTlk1UkQxMCZlbmNyeXB0ZWRBZElkPUEwMTE4MjcwMlhMRzZMOEpWNUVYRSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU%3D

I also have an automatic so I use the cup holder closest to the center console storage bin.

 

Wasn't too bad. Been a while so I don't remember exactly but iirc, it's just like pulling the radio out but with a couple extra steps.

I just used black for the middle bits and colour matched Barcelona Red for the red bits. I'd like to re-do it at some point, though. I did it last fall/winter and it was probably colder that it should've been for the paint.

 

https://www.tacomaworld.com/threads/the-ultimate-headlight-upgrade-h4-not-led-or-hid.398066/

 

Oh damn just saw that lol after i made my last comment lol. How hard was that to do the mod?

 

what size tube did you buy?

 

Blew the axle, hub, and the LCA uniball bolt Friday night. Had a spare axle on me but not the hub or hardware. Quick stop to the laps and a hardware store the following morning and it was back in action.

 

@fatfurious2 I found your groupie!

 

my Instagram is better

 

Sup with them stacked spacers.
Non hubcebtric

 

Pretty sure that's an optical illusion. I think his rotor is just not seated to the hub (since it's broken).

 

Dang! And here I was thinking I was being original... lol

 

i have a similar in my DD and love it, i have found that do do the "fascia" around the CD slot(on the Taco), the tabs make minimal contact inside the slot. any similar problems with yours?

 

That's how you know you're a hardcore off-roader.

 

Here's the thread I was using. I took a risk knowing it wouldn't work on a 2015, as someone notes in the thread. So guessing it wont work for the 13-15 trucks, but should be good for earlier models.

https://www.tacomaworld.com/threads...shark-fin-with-a-oem-satellite-stubby.552228/

 

I would rate it a 5 or 6 on the difficulty scale out of 10. I've done way easier plugs, and I've done some that were a lot harder. Like remove the front engine mount and tilt the engine, harder!

I run the Mobile 1 20k filter. I have been since around the time they came out. Hasn't let me down yet.

That's how I power washed the front of our house. I looped a ratchet strap through the ladder and tightened it to the bed. IMO it was safer than just being on the ladder by itself. Other than I was 4 feet higher.

https://www.tacomaworld.com/threads/gps-install-hardwired-to-the-a-pillar.305904/

I did this and hardwired a charger with an add a fuse. Ill probably redo it once I get a new phone with wireless charging.

Holly Glare!! Good luck bud.

 

Spacers are for people that suck at math and can’t figure out which BS wheels to buy.

This, we didn’t even put the dust shield back on, still laying in the bed, I’ll get to it next weekend when I drain the diff to check for metal.

 

Like a chump I walked past the pair of spare hubs in the shop four different times and told myself I wouldn’t need them. Janked myself with that move. But yeah, carry spare axles everywhere and don’t forget the 35mm socket for the flange nut.

 

yeah the bilstein 5100 have hex

 

Are you saying bilstein makes bed bolts or are you referring to the shocks?

 

Thanks! Maybe one day our trucks will meet in the wild. If you do decide to pick up a pair of those headlights, remember to use the coupon code 'Exclusive' (I think that's right) for $100 off. Makes them actually quite affordable.