Colorado Trading Post

Says DCLB but the pic shows a short bed?

 

That's a short boi.

 

I initially read this as $100 each for TW and looked at the topper and thought "damn he is generous to his TW peeps"

 

If you are selling your truck, can i swap tailgates with you (Mine + Cash for Yours)

 

CL updated now. Sorry about that.

 

Sold the truck to my business. What’s wrong with your tailgate? If it’s not too bad we can do a swap. It is a work truck, but I’m getting it wrapped, so as long as it’s not going to affect that I’m down.

 

Interested in Topper.
Would this support an iKamper Skycamp?
Total weight about ~750 lbs in the tent, so about 325 on the topper itself.
2 large dogs and 2 people * My fatass xD* and RTT and maybe an awning / fly fishing rod holder.

 

Hot damn, its Friday and we have another drive shaft deal! I am selling my 2 piece drive shaft for an 05-15 access cab or DCSB for the low low price of $100!

It has about 90k miles worth of adventure etched into to the paint, but no dents, hard hits, or deep scratches. I am not sure how many miles are on the u-joints but i am confident it's in the 10-20k range and they are in good shape.

BUT WAIT! Theres more! The gem here is that it comes with a brand spanking new IEDLS poly center support bearing for a Ford ranger. Some folks trying to solve drive shaft vibes have had success switching to these, which is exactly why I bought it and what I was planning to do. The IEDLS bearings are $100 new. That's right...you're basically getting a free drive shaft for the price of the poly bearing!

Read more here:

https://www.tacomaworld.com/threads...uy-iedls-polyurethane-carrier-bearing.421410/

Due to the difference in design between the OEM and the IEDLS mounts, it may require you to install it upside down or right side up with a plate (also included) and longer bolts (included if I can find them) and possibly some sort of spacer (not included) in order get the center of the bearing where it belongs. All this is covered in the link above.

You'll need to do some fine tuning of the driveshaft angles as many of you know they are finicky with our trucks once you start changing geometry. Read more here:

https://www.tacomaworld.com/threads/drive-shaft-vibrations-solved-step-by-step.244535/

Price is $100 firm.

 

Interested for a spare...
Why are you selling? Didn't get rid of vibes for you? Went to 1 piece?

 

I went with a 1 piece. I was planning to keep this as a spare but after my crawl box install I can no longer run a 2 piece as I removed the center bearing mount from the frame because it was contacting my drive shaft. I snatched up the 1 piece that @DaVikes was selling for a spare so someone else might as well get the use out of my old 2 piece.

 

Bumpity bump. Softopper is off the truck and camper build hits full swing next week. Someone buy this ish. $500 for TW folks

 

i believes max weight (dynamic) is around 700-800 lbs. and (static) 400lbs for driving around. I would have to call manufacturer to verify. Either way it is pending pickup at noon today. If it falls through you would be 4th in line.

 

Im a ways away so it would be a couple days anyways.

 

For sale king coils for sale 14” 650lb
have around 15K on them switched to 700lb Sold

 

Damn I wish you had gone from 700s to 650s.

 

Bump with a price drop to $450 for a DCLB Tan Softtopper

 

Bumpity bump...

open to offers on my tcases

Original post:

Got some goodies available that are a little more interesting than my usual crap.

$100 - DAMAGED 2007 FJ cruiser tcase 175k miles for Auto trans (23 spline)

My dumbass cracked the rear half of the case at the bottom putting it back together because I didnt properly line up the hi/lo shift sleeve. It could probably be welded or JB welded. The case has not been sealed back together so that you can work on it and twin stick if desired. The rear output flange cover should probably be taken off and re-sealed. I replaced the input shaft seal, front output shaft seal, oil pump seal, and shift rail seals. I did not replace the rear out shaft seal or either of the out shaft flange seals but they are included along with a new output shaft nut and shifter base seal. The shifter was hacked off at the junk yard. I dont think I did any other damage except the crack pictured and potentially disturbing the rear output flange cover seal as previously mentioned and pictured.





2009 Tacoma Transfer case 104k miles for manual trans with actuator (22 spline) - $225

2009 Tacoma front ADD tube with actuator 104k - $125

2009 Tacoma 4wd ecu - $100

All 3 of the above from my 2009 taco as a package for $400 (save $50)

These were all pulled from my truck at 104K in perfect working order, actuators and all. I split the tcase to pull the input shaft so I could have a crawl box adapter made. Its assembled but the case is not sealed so you'll have to take it apart to seal it. Theres no speed sensor but the rear output has the required worm gear for the manual trans...it curently has the FJ filler plug. The shift rail sensors are also from an FJ so you'll have to solder your own connectors and torque those. The input flange cover also needs to be removed and sealed and properly torqued. Everything inside is properly torqued.

The ADD tube has the support arm bolts and the star bolts for the diff.




I think that covers it. Let me know if you have questions or need more pics. If an MT guy wants the FJ case and an AT guy wants the taco case, we can swap the inputs and make that work. I would prefer not to separate actuators from the ADD and Tcase but would consider it if folks want specific parts.

Edit: I would also include the in cab 4wd switch which is still installed in my truck for someone who wants the taco parts.

 

WTB... Looking for both left and right tail light assemblies for a 2001-2004 Tacoma. Would like the whole setup, with the “main” wire harness that is connected to the housing, dont need the harness beyond, so they can just be unplugged at the back of the lights.

Will hit the yota scrap yard soon just thought I’d check here first incase someone wants to get some out of their garage.

 

Sold pending funds

 

No I still haven't cleaned the mud off them.