What Have You Done To Your 3rd Gen Today?

1. I did drill into my DB cover to mount the front runner tracks. It was one of the harder things I've had to convince myself to do, but it had to be done. I'm not a fan of the KB Voodoo rack system.

2. If the tent is on there, there's no folding of the DB cover, which is probably the number 1 con to this setup. Other than that it's pretty sweet though.

 

Agreed. But I'm just not there. Yet...

 

Got my rear diff breather mod supplies. Going to relocate to behind driver side tail light. Small weekend project

 

A good antenna mount option for those who don't have or need ditch lights is Victory 4x4's VT3CB-BARE antenna mount.


And there are others . . . I bet you can get some good ideas here.

https://www.tacomaworld.com/threads/ditch-mount-used-for-antennas.608357/page-2#post-21900216

 

Some 17's over here

 

Love your Yosemite Sam hitch cover! I have one of those also.

 

Welcome to TW!

 

Nice!

 

Very nice. Just go my Tech this past weekend. Looking at the Yaesu 400 too get.

 

Hello Shayne, I did this myself and do not have a great working knowledge of electrical; I just figured most of it out as I went. On DSIM's thread he describes in pretty great detail most of his installation: https://www.tacomaworld.com/threads...tesy-rock-lights-v4-by-dsim-solutions.545892/

 

Very Jealous. Nice setup.

 

Agree! Add me to that list.

 

I did the same because my near-permanently mounted camper nearly completely blocks XM and FM signals.



Signal now is much improved

 

I really like that bed light kit, it looks great. Do you have a link for the one you bought? Did you wire it into the existing bed light switch or is it separate?

 

Not today, but I mounted my hi lift jack using a Jeep JK mount off Amazon yesterday. Had to elongate one of the original mounting holes by about an 1/8 of an inch and it mounted right up.

 

Got some new shoes, courtesy of @ShowstoppersUSA and Don over at @Discount Tire (with my local America's Tire). I can't recommend these two folks enough!! Hit em up! I'm missing one of my Work decals, but will slap them on as soon as they come. Excuse her, she's a little dirty.

265/70/17 Goodyear Ultraterrain AT SL rated

 

@Maxcustody where did you get that braided wire man and did you run all new wire to the diff ground connections, etc ? is that basically the big 3 ? looking to do the sdhq terminal upgrade and also wanna clean up my wiring

 

Badge overlays and caps installed, definitely worth the money. So happy with the results. Those caps have annoyed me for far too long. Didn’t want to put the badge overlays on til I figured out if I wanted to spend the money for a good paint job or just black caps, glad I did.

Getting the metal clip off and back on wasn’t as bad as I feared.

 

Not sure where he got his... I’ve used this for all my wire runs.

Wang-Data 50ft-1/4 PET Expandable Braid Sleeving –Black –Cable Management Sleeve Cord Organizer for wrap & Protect Cables

https://www.amazon.com/gp/aw/d/B074M2Y3G1?psc=1&ref=ppx_pop_mob_b_asin_image