What Have You Done To Your 2nd Gen Tacoma Today?

Hey Crash, have you seen this one? Pretty sweet set up.
https://www.tacomaworld.com/threads...t-oem-parts-part-s-provided-installed.443656/

 

I got 80k miles out of the factory brakes. Went out and broke the pads in this morning. My Rotors were warped bad! Brakes are smooth as butter now!

And I forgot an after pic. Complete failure

 

Are those from SDHQ?

 

Borla list the Tacoma 2005-2012 Cat-Back™ Exhaust S-Type part # 140140 but only up to year 2012 for DCLB.

Are there any differences between the 2012 and the 2015? Anyone have this on a 2013-2015?

May have answered my own question. Checked AFE for their systems and they list different #'s for 2013-2015... From the picture the only visual difference is that the rear most hanger bracket is pointing to the driver side on that one and to the passenger side on the 2005-2012.

 

I wish I could like this twice!!

 

so @Xx Ares xX can like it twice

 

I'd recommend reaching out to the manufacture (Borla). Email them! Keep the record! If they tell you it fits, then it fits.

This way if you run into any issues, they should provide support and if they can't help, you stand a good chance of getting your money back.



Contact Us
https://www.borla.com/contact/

Million Mile Warranty
https://www.borla.com/support/million-mile-warranty/

 

Thank you!

 

I feel your pain. My garage door is only about 6 1/2 ft tall.

 

Put a new exhaust tip on.

 

Pulled the plastic behind the rear seats. Worked on organizing a little. Laid some old carpet behind to cut some noise.



Left to right is a battery jump starter, a bag full of recovery gear, jumper cables, first aid kit, change of clothes for me, clothes for wife, coveralls, shops towels, and TP. Oh and of course the old trusty .22

 

Added spidertrax 1.25 spacers. Stock height 265/70/17. Had to trim mud guards and fender liner to eliminate most of the rubbing. Bilstein 5100s + aal on order!!

 

Um. Did you paint the rotors too?

 

Took the dash apart for another painting project.

 

Got new rubbers put on , they set the psi at 35 ?? Should I add more it's a 285 75 16 10ply e tires , I dont really tow , only my motorcycle

 

no the new ones came powder coated. The pads rubbed it off on the braking area.

 

Got a creeper today.

 

There’s a website somewhere that tells you what psi it should run based on your original tire size/door sticker recommendation. I forget what it was called but a google search will pull it.
I have 275/70/17 wildpeak c-loads and it said to run 38-40ish. I did the lower cause i was usually running 33-34 before and didn’t want the wear to be uneven. Getting better mpgs now tho

 

They're fun little rifles. Here's my little Savage.