What Have You Done To Your 3rd Gen Today?

None of that is needed. Just clean the surface really well, use plenty of junk mail newspaper ads to protect from over spray. I did mine a year ago and it's holding up really well. Check my build thread for photos.

 

That's what we're calling it? Senstitvity?
Senstitvity it is then.
Welcome back Brother!

 

Saw this easy install from @VicNic3 .. shout out to you . and installed within 15 minutes.. No drilling required

 

Made a homemade jerry can holder for the bed.

 

Welcome to TW Matt & Co.

 

Thanks! I was trying to be delicate....I usually am only on here while at work, but with all that's going on, I've not been at work as much. I've gotta keep up better while I'm bored at home!

 

Sending you a PM about those caps.

 

I just about finished up the jump seat flooring. I wasn’t very comfortable having the boards and Dewalt cases float around in the event of a roll over. So I stripped the jump seats and repurposed the hinges to manage the plywood boards.

 

LOL, I've got mods in my pile that were bought for my 2011 2nd gen.

 

Ran er pretty close to dry. Wonder if that distance to empty is when it will shut down or if there is a bit of reserve.

 

Thanks for your products, I had forgotten who I bought them from! Well made and obviously and easy install, just time has been at a premium to get anything truck related accomplished. Now working remotely, I can actually sneak some time in here and there to get a few small jobs done. Still have atleast a half dozen others waiting in the wing!

 

Is more like distance to a gallon and a half. Gone 20 over myself.

 

I dont know why these Midwest cans are so angry

 

Mine are angry too, but It might be because they are not bolted down yet

 

No installs today but got to drive my truck and admire the view!

 

So I have a Tacoma which has a 21 gallon gas tank on it. Let's give a gallon in the lines so that makes 22 gallons. So why does my distance to empty say 300 miles when it should say 400-440 miles until empty, when full, assuming the average mileage of 20 MPG?

 

Yes, I took the bumper caps off. Scuffed them lightly with 180 & 1500 sandpaper. Washed, dried and did several light coats of the Rustoleum Paint & Primer. Did the chrome grill bezel at the same time.

https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-7648#post-22991836

 

Do you recall what size bolts hold down the back of the seat?

 

Caught a moose checkin out my truck

 

Mynd you, møøse bites Kan be pretti nasti...