What Have You Done To Your 3rd Gen Today?

Rebuilt my tow hitch flag pole for the Glory of the Empire.

 

Right, me too. Thanks for the like.

 

Sick! What’s the panel made of?

 

3/16” 5052 aluminum

 

http://www.opt-7.com/redline-triple-led-tailgate-light-bar-with-reverse-sequential-turn-signals/

 

decided to add a little flare to the fender decal

 

Careful. Those things scratch.

 

Lift and 33s

 

Lol I have 3.

 

Busy Day, Me-so Chrome delete kit. I probably mispronounced his name!
https://youtu.be/5EPDiERTNM4

 

Not to my 3rd gen but to @YSL 3rd gen . Installed a Switchpro 9100

 

I ran mine tucked under the headliner around the drivers side to the rear. I also used the mirror adapter. Easy install.

 

How hard was it to tuck it under the headliner? I'm getting ready to do this.

 

I got the roof rack installed. Lights will be installed next on the rack.

 

Not hard at all. I pulled down the center overhead console, ran the wire from the front cam straight up under the headliner to the opening, then ran under the headliner to the A pillar, then the wire is just tucked under the moulding above the doors to the rear where it goes back under the headliner the the rear cam. I used a plastic tool to help push it under the trim and headliner. I actually stated in the rear and worked to the front. After wired up, I just tucked the extra wire in the A pillar. I also used the mirror for power and ran the power wire straight up from the camera under the headliner then had it come out of the headliner directly above the mirror. Have everything a clean look.

 

Right on! Glad you like my kit

 

Nice, really nice.
Zim

 

Very clean install. Question. Does the lid for the fuse box clear easily if you have to pop it off?

 

Sure does I make sure of that

 

Stuck a four pack of rock lights to the frame to use as puddle/courtesy lights. Tied them into the OEM bed lights. The passenger side bed light plug powers the rock lights, the driver's side now powers both bed lights. Anytime I hit unlock on the key fob, open a door, or turn on the bed lights by any means, the ground under the truck is now lit up. Cost about $35-40. I have a video, but no clue how to post it.I
EDIT: I didn't use the in-line fuses. Not necessary.