What Have You Done To Your 2nd Gen Tacoma Today?

Yesterday I got her a little dirty on Bunce School Road

 

Finally got around to adding a Baja Designs S8 to my BAMF front bumper.

 

That’s correct, I think some of the Sport 4th Gen 4runners had the same bigger front brakes.

 

Boogie3478: I really liked your vid today—nice mod....but you must do something about that cough.

 

Yes it’s all listed in this thread, super helpful. I bought it all via part numbers.

https://www.tacomaworld.com/threads/2nd-gen-diy-big-brake-kit-oem-parts-part-s-provided-installed.443656/

 

Got rid of the silver tweeter trim rings today.

 

Those were the LEDs that I originally bought, but had to return because the heat sink would not fit in my high beam location. I then bought the ones with the small fan and its heat sink was considerably smaller, so it would fit into my housings without any modification to them.

 

Blacked out headlights

 

How’s u do that?

 

Got a 3 inch lift installed today. Bilstein 5100 shocks. Really happy how it turned out and it rides so much better than stock.

3 inches is perfect on my 265/75/16 KO2s, I was rubbing sometimes at full wheel lock on stock but not anymore.

 

Pops out from behind when you have the door panel off.

 

Price point and my current needs were fulfilled with urd. Lol @ failure point. I wire everything myself including my alarm and remote start, I think I have bigger issues than the wiring for the calibrator

Once I supercharge I will go ucon. I can't justify $700 for a non standalone EMS. I may entertain it though haha

 

Mine had a mean plastic weld job, I had to drill them out

 

Same for mine but a little steady pressure from a flathead screwdriver pushed them out. No idea why Toyota didn't just use some kind of arrowhead tab there instead of the melted plastic method.

 

Agreed. I'll be changed out the door arm rest soon and that has to be drilled out too. Tabs would be ideal

 

I used my truck for yard work today. That's a 900 pound bag of sand. You couldn't really feel the weight driving either. It accelerates and stops normal. I don't ever drive fast though. So old man speeds are my normal. The springs were pretty close to the bump stop though.

 

Installed a steel bumper from Relentless Fabrication and added some tie down anchors To my bakflip mx4

 

Beautiful wheels! Who are they by?

 

F5’s! And I chopped the exhaust and put a downturn just past the rear hanger.

 

Here: @boogie3478 ’s vid
https://www.youtube.com/watch?v=je_Z1jlOH8U