What Have You Done To Your 3rd Gen Today?

Placed an order from @EasyDoesIt

one of each for my driver seat......................

https://www.tacomaworld.com/threads/fs-ddi-front-seat-multi-mount-panels-molle-panel-3rd.648100/

https://www.tacomaworld.com/threads...s-lifts-the-front-of-the-seat-3rd-gen.607482/

 

Thank you for explaining! I had a company up in Seattle outfit my truck and they put in the Switch pro. I had asked him to have my lights be able to be turned on remotely as well but the software is really glitchy.

 

Mine come over the edge on my 2020 as well

 

The wireless unit works from about 75' feet away with the hood closed which surprised me. It is very cool to be able to turn on the off road lights while standing away from your truck. Note, these are Amazon.ca links. I'm sure there is a parallel unit at Amazon.com.

$33 12V 4 Channel 4CH RF Wireless Remote Controll Switch Relay Module 433MHz

https://www.amazon.ca/gp/product/B012RHTOU0/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.ca/gp/product/B01NCA4QA7/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

@baldbeardedtaco FYI bottom row does not flash like in the video.

https://player.vimeo.com/video/412347728

 

It looks like they have a pic on that. link that. shows the non hoop plate, and the light bar still above the bumper.

Did you go with Aluminum for less weight?

 

Have any pics of them shining on something at night by chance?

Link to purchase please as well.

 

It was a big week! Upgraded tires from the standard 245/75/r16 to 265/75/r16 Falken Wildpeak AT3Ms. Looks like a whole new truck, and really fills out the wheel wells better with the OME 3" lift. Then we finally got around to installing Yakima tracks and Prinsu Top Rack on the ARE topper. Ecstatic right now! Cheers!

 

"Adhesive bulb type weatherstrip?" Please elaborate

 

those look like second gen door still protectors

 

I'm speechless.

 

So do door locks.

 

I believe they are. Loose order finger on my part.

 

Hell hath no fury like a woman with a tude.

 

I’ve seen that look before. But it was right before having a glass vase thrown in my direction

 

Finished coating the RTT rack in POR15 and then put a couple of coats of textured paint on it. Had a friend 3D print me some spacers to go in between the rails and the bed. That way it forms a compression point that doesn't over extend the rails passed the bed, and also provide a rub buffer between the rack and the bed. Had to make some custom washers to fit the way I wanted them to. Came out pretty good. Now to get the RTT on it, and work out how I'm going to mount the awnings. Hopefully the tube clamps come in soon.

 

Looks nice man! I was wondering with the lift did you add the carrier bearing drop rear shims? Any driveline vibes? Almost ready to pull the trigger in Dakar’s and 885’s.

 

Its not like the $20 is a big deal, but as anal and over-thinking as Toyota is in most cases how can this be overlooked?

Meso Design is good, but I think the gas cap fit is weirdly tight necessitating two hands to insert the cap. It does not need to be tight to work. Would function better if the hole were 1mm larger. Even if the cap were sloppy loose it would still stay put. I'll probably remove and Dremel larger.

 

I had some driveline vibes after install. I actually have a thread on here that says how I fixed them! I'd buy them again for sure. Driveline angles are key, ended up having to install the CB drop and 3* shims on rear axle to make them stop. The fix seems to be pretty common between everyone, just minor differences. Hope this helps!

 

Bed lighting kit and Total Chaos stiffeners.
OEM running boards
MESO chrome delete in red on air vents and start, and 4WD switch.

Snugtop Rebel won't be in till May 11th. Don't know how I feel about Snugtop as a company. I ordered March 17th with a promise date of no more than 3 weeks so first or second week of April, understandable with the Covid 19. However they are filling orders to people that ordered after I did. Seems shady to me.