What Have You Done To Your 3rd Gen Today?

Great info, thanks again for the help.

 

Installed the S1’s for ditch lights finally and mounted the Heretic bar up top. Still waiting on a connector from them and 12 awg wire to get the bar up. Ditch lights fired up without a hitch.

 

I put a new battery in it, lol.

Great start to the day, truck gave me issues starting this morning so when I got to work I turned it off and tried to turn her over again. tick tick tick, second try, not even one tick. DEAD AS CAN BE...

Checked battery and it was the original from Jan 2016 so I guess that's understandable. New battery installed, runs great, and I'm not stuck anyplace.

 

Debaged TACOMA and V6 today

 

Stained and sealed my DIY tailgate replacement (plywood) panel. Think it turned out great!

 

That thing is awesome. Beautiful stuff man

 

I wanted the MGM ones but they weren’t in stock. I did the BHLM by buying someone’s takeoffs on here and sending the headlights to someone locally. When I took off my headlights I watched a bunch of videos about removing the bumper from that bracket on the fender flare to access the one hidden headlight screw. They made it look so easy just popping off the bumper. But when I did it, I broke the bracket the screw was attached to. I ended up using my soldering iron to melt the plastic back together and it worked, no issues. And of course after I did that, the MGM part came back in stock but I said forget it. I hope I never have to take off that bumper again.

 

Finished up my lift and had my new shoes put on!
- OME BP-51
- JBA UCA’s
- Nitto Ridge Grapps
- Method MR312s

 

Someone has mentioned a somewhat significant difference in feel between these and OEM. Whats your thoughts?

 

Got a bed mat and a AVS aeroskin 2 hood protector
Tires next

 

You reckon you would need two of the Rago mounts per 20 liter fuel can? Did you had to make any mods to the fuel can holders to make it fit properly?

 

So much sex. Nice work!

 

Custom fabricated by a shop in the Denver area. Much better than most brands found online and 1/2 the cost.

 

do you mind pming me the shop info? I’m in aurora. Thanks !

 

I have an access cab so I only did 2 handles, but they feel exactly the same to me (after the WD-40 spray) and took 10 minutes to replace. I've only had them on for a couple weeks.

 

Not going to take this option off the table then.
Thanx for the feedback and tip man.

 

Cut the bumper to get ready for SSO slimline hybrid and stage 2

 

I ordered some of those extended thread lugs because these are kinda older model Mickey Thompson I think... hoping they will work

 

Crap. I have the same steps. Did you scrape them on something or did they just rust out like that?