Anytime backup camera brendanwebster911

So i purchased this from brendanwebster911 and decided to install it today even thought i purchased it two years ago. Unfortunately, i do not have the instructions to install it. I’ve done numerous of searches and it seems like i can’t find one that assist my current situation.

Can someone assist or if they have the old install instruction... can you send it to me?

here’s where I’m stuck at: One side is power and ground for the switch . Where do you tap for the power typically? Ground i got

For the head unit side...I have labels, but I’m not sure which red... also don’t know what “C” “A” and “B” mean.

Thanks everyone ahead of time.

 

Does anyone have a wiring diagram from a different seller they can share ?

 

I guess I need to know where the Red and Green wire goes behind the head unit. Trying to figure out which wire to tap. Thanks for the photo though

 

https://www.tacomaworld.com/threads...e-navigation-override-smartphone-mirr.501617/

Check out that thread, I believe it gives you pinouts for what wire to splice etc. From what I remember, basically you're cutting two wires, and when connected they turn the camera on. You're not supplying external power or ground to something else

 

No luck... I also have a Y connector which I think has a diode ...

 

Bump @roy326 have you figured this out? I have the same issue.

 

https://www.dropbox.com/s/1wntksplyu0sphf/backup%20anytime%20mod.pdf?dl=0

Hopefully this helps ! Good luck