Transfer-case and Diff gaskets

So i bought this gasket kit for my diff's and t-case. They didnt not come labelled so i was going to match the ones i take off to the new one. While draining my rear diff i noticed it didn't come with any. Any advise on how to know where the gaskets go. Thank you.

$15 GENUINE TOYOTA GASKET KIT FOR TRANSFER AND DIFFERENTIAL SERVICE

https://www.amazon.com/GENUINE-TOYO...VMGRBWP612H&psc=1&refRID=83KEHF9TXVMGRBWP612H

 

The silver crush washer goes on the drain plug for rear diff.

The copper washer goes on drain plug for front diff

The thicker and flat silver washer goes on t-case drain plug

 

The bigger silver ones go on the diff.

 

thanks, it actually came with 6 total. so im guessing the fill plug needs one as well?

 

If your doing your rear differential the two of the 3 crush washers on your middle finger go there and torqued to 36 ft lbs.

 

Yes, that's correct. Two on the top are for t-case. Copper one and one of the other silvers are for the front diff, then the other two are for the rear diff drain and fill

 

ok thanks, ill also be doing the front diff

 

thanks!! @BassAckwards

 

https://www.tacomaworld.com/threads/front-diff-and-transfer-case-oil-change-howto.147631/

 

I just use Teflon tape, have for years and don't have any leaks...ever.