What Have You Done To Your 3rd Gen Today?

@imagineer Glad I could help

 

Dirt King Performance LCA

 

I mounted Hellwig HEW980 helper springs on the rear OEM leafs last week. Recovered about 1” in rear lift (back to OEM height) when unloaded, and level when loaded for camping with my travel trailer attached. Along with better suspension, towing and cornering are more stable. Was easy to install and reasonably priced.

 

Camburg Spindles Sway bar delete
Icon 2.5 VS Extended Travel Coilover with CDCV 700lb Coil
Stoptech BBK Slotted rotors Black anodize 6 Piston E Calipers

 

Did some walkway work this weekend, of course the truck hauled the sand, gravel, and paving stones.




Then installed my chalk bag water bottle holder from Static Climbing.
(Thread)


Installed my custom shift knob from Travis Moore. It's weighted and matches the interior.. threaded perfectly. I also used a boot collar retainer from @7r41lbr34k3r . (Thread)
To keep it hiked up, I added some electrical tape. See photo two below:

 

That’s a nice set up, those spindles are beefy!

 

How do you like the sub2000

 

Thanks. now I know what a LCA is.

 

Easiest install... WeatherTech SunShade Full Vehicle Kit. Not a perfect fit on the rear doors but overall pretty impressed.

 

How come you just didn't ask?
No such thing as a stupid question....... seen a few stupid answers though especially from those making fun of a person trying to learn something.

 

Sliders done by member @Shmellmopwho

 

Prinsu fun today!

https://youtu.be/14idz4ptozg

 

Nice! (nice video too).
After a little more than a year I'm still thrilled with mine. It has been used more than I would have thought originally.

 

I try not to over use the term "Pardon my ignorance".

 

I love mine and they are more than 2 years old. They’ve held up great

 

A forehead tattoo goes a long way to prevent the need to say it!

 

Thanks!

 

Kings for the Taco
Got my week planned out

 

This took me a few days, happy with how it al turned out.

I spent a few days making some pull out drawers. I basically followed this video https://youtu.be/d-BWmPaBfjQ for concept and how to build the locking mechanism. The locking T-handles came from the local Leer truck cap dealer King City Trailers, the pull handles were from Lowes as well as the misc parts to make the locking mechanism. I made two separate drawers so I can use one, or both, or stack them etc, for now. Things may evolve, but so far I am really happy with the results. I'm adding a system to allow for dividers as well if the need arises. I'll be anchoring them to the bed tie-downs, and they fit nice and snug to the end of the bed with the tailgate closed.

I used 1/4" HDPE to make the slides and waxed the drawer bottom, and also put HDPE strips under the units to allow for water drainage and minimal wood to water contact when it rains. Rough carpentry at it's best. Here's a few pics of the project and final results.