2020 parts list

sure, anytime...

 

@Jeff Lange,

What is the parts number for camera bracket for 2020 trd pro grille?

 

I don't think you can buy the camera bracket separately from Toyota. Most people seem to be cutting the OR bracket to make it fit the pro grill. However @Grant83 is 3D printing them if you don't wanna cut your factory bracket.

https://www.tacomaworld.com/threads...ap-w-front-camera.635051/page-9#post-23598967

 

Unfortunately the emblems are not sold separately for most wheel centre caps, need to get the complete cap, sounds like the dealer is getting this taken care of for you though, so that's good.

53101-04100-B0 - Grille, Radiator (TRD Sport/TRD Off-Road, Silver 1D6)

As was said, not available separately, have to order the camera.

867B0-04030 - Camera, Front (TRD Pro)
86799-04020 - Wire, Front Camera (TRD Pro)

Jeff

 

Hi Jeff thanks for getting back to me. Dealership provided four new wheel centre caps. The emblems were nice and snug on this set.

 

Sorry if this was already asked.. does the LED package come with LED brake lights? If so, what’s the part number and if anyone has a pic.

 

I think the LED package is just the head lights and fog lights. Tail lights are still the same standard bulbs.

 

Thanks

 

I have the black oval step bars (PT767-35112) that I want to move from an old to a new truck. The brackets and hardware (bolts, washers, etc) are all full of gunk from an undercoating job and I'd like to have clean ones if possible.

@Jeff Lange is it possible to just order the brackets and hardware separately so I can remount them?

 

PT767-35110-HK - Kit, Hardware

Jeff

 

Looked it up and the cost is ~ $16. At that price, wondering if that is just the bolts and washers? Any idea if that includes the brackets also or if they can be had separately?

 

@Jeff Lange
Got part number on these new TRD rims yet?

 

Apologies, that's my bad.

PT767-35110-BK is the part number for the brackets.

Not yet, no.

Jeff

 

For the 2020 LED headlights, what are those little lights on the lower corner for? On the TRD Pro headlights it is TRD on the passenger's and Pro on the driver's.

Does the 4Runner's hood insulation fit on the Tacoma? Maybe with slight modification or trimming. It looks like the clips would like up.

Also RAV4 related, but it's there a part number for the puddle light cover? Any version of that cover is fine, blank/camera/puddle.

 

Just installed a 2020 pro grill on my sport and am now looking into getting the front camera for the mtm/pano feature. My 2020 sport did not come with the advanced technology package so it’s not currently set up for one. So far from this thread is seems I need the following part numbers.

867B0-04030-front camera
86799-04020-wire harness
86792-35030-ECU

are there any additional parts required and is it even possible to retro fit it in?

 

I like the factory rims that came on my my TRD Off-Road but damn....

 

I saw one in the Houston Craigslist earlier...

 

@Jeff Lange You seem to be the man in the know - apologies if this was already asked in this thread. I am not sure of the exact search terms to use...

I am looking for the part number for the OEM roof rack channel trim. They are rubber and have the adhesive tape on the bottom... Double Cab 2020 OR.

Thanks in advance!

 

There aren’t many roof rack replacement parts that are sold separately. You will likely have to get the rail itself.

Do you have a picture?

Jeff

 

I called the dealership and they have them in stock. I will call back for the part number so I can find them online as they want $120 for each side.

Pink arrows point to the part in question: