What Have You Done To Your 3rd Gen Today?

I'd thought about it, if there's enough interest I might try churning a few out[/QUOTE]

I’m interested.

 

I'm planning to use this in the fall before our winter hits. You guys that use this when you put this on do you still wash the undercarriage in the winter spray down at least or no because it will wash some of the stuff off?

 

FYI @MESO Total Tail Stage 1 back in stock!!! Just ordered mine

Which also means I wont be able to use my $90 Diode Dynamics reverse bulbs anymore

 

I had it done by a shop first couple of times and was told just to leave it alone over the winter. It washes off with soap and water, but seems to stick pretty well through rain and snow. It does attract dirt and your undercarriage will look like someone smeared grease all over it. I find this preferable to rust.

 

You should pressure wash it first, when dry go to town...i think you'll need about 3 cans...you could get a big can and roll it on too, some tight spaces you'll need a sprayer. Try stay off the rubber areas, if you accidentally sprayed some just wipe it off...otherwise it's safe and effective against rust. It works excellent on preexisting rust too!

 

Wow! Very well done!!

 

Rubber is okay so long as it's oil and gas resistant. KEEP IT AWAY FROM YOUR DOOR SEALS, it will cause them to swell, and of course keep it away from your brakes and exhaust (it will smoke).

This year I bought an airless sprayer (high pressure required) and a gallon of FF and will be doing it myself.

 

Added the AC drain mod.

 

I need to do this. What size hose did you use?

 

Look here:
https://www.tacomaworld.com/threads/rust-on-frame-with-a-c-drain-mod-fix.444138/

 

Thanks.

 

I got all the stuff to do the AC drain mod and the Rear diff breather mod. It's mid-July in Texas so it'll be a while before this gets done.

 

Yup. I know the feeling. Hot as hell here and the gnats are using flippers to cut thru the humidity.

 

Meanwhile... The entire time you're driving, you will envision that steady drip, drip, drip of water from your AC hitting your frame and causing the rust to flourish unabated.

drip, drip, drip...

 

Took it out in the heat..

 

Installed a bracket for the compressed air setup I built.

 

Friendly fire always hurts the worst - sorry man! but good reminder!

 

Found the perfect usb flash drive that matches the TRD red trim in my truck. It was a 64 gb disk so entune wouldn’t read it out of the box, but I managed to find a way to format the flash drive to Fat32, which is the max format Entune can read I guess. Now it works perfectly!!!

 

Wait, where did you get those?

 

LOL i think mine dries as hot as it is in north Florida I seen the devil drive-by on ghost riders chopper on fire LOL