What Have You Done To Your 2nd Gen Tacoma Today?

Thanks! That's outstanding! Now if only I can get it in place before my vacation this weekend!

 

Most of the hardware can be found at a local hardware store. The Ram stuff is mostly 2 day prime on Amazon. If you get it ordered today, you might make the cut off. I added a charging cable that runs behind the a-pillar and down behind the dash to the fuse box. I would like to upgrade it to a wireless since I got a new phone, but its low on the priority list for now.

 

I had my buddy run codes on my truck and the SLT Solenoid is stuck open. Back into the transmission I go! Hopefully this finally fixes the rough shift from second to 3rd and shuttering in reverse. But I am pretty sure I fried the clutch that controls 4Lo and reverse; last winter.

 

Volkswagen style

 

I thought so!

 

I actually installed this Thursady but finally got around to posting it. It's a C4 bumper, Trd grill, a traveler 30 inch light bar, and a smittybilt X20 10k winch. I have the winch hooked up and already did a test use of it. The lights are not done yet. Putting all of that black up front has made the peeling front bumper look way more pronounced. Its bothering me but I know nothing about painting. Pretty stoked on the new look and really glad I got a winch. Pulling myself out with a hi lift once was quite the process.

 

New Kenwood head unit. Really needed a better Bluetooth setup. Has HD radio and hands free calling too.

 

I keep forgetting about this - I need to do the same to my truck.

 

in what application?
by spanner you're talking about the ones with 2 holes but otherwise smooth head?
both usually com in those "cheap" security bits sets if ant thing I think Robinson (square) is more secure for the rarity of the bits in sets.
I think one can get more torque with Torx than spanner
hope that helps you

Craig

 

I’m finally replacing the sun visors on my 2008. The passenger side gave up and I went ahead and got the driver side. Took 12 years to go stop working, not bad

 

Here is my 2006 Indigo Ink Taco. Have been fixing up the Yota for my oldest son...Hopefully he will enjoy it as much as I have!

We spent a few days cleaning and repainting the bumpers, hood, and Roof. Man...the paint was in bad shape from sitting out in the elements.
Install the 2005 - 2015 TRD Pro Grill and Weather Tech Bug guard. 22" Light bar will be on next.

 

The only thing I’ve done recently was yesterday “PAID IN FULL”

 

I used an m6x50mm socket cap screw to mount a RAM motorcycle ball:
https://www.fastenal.com/products/details/MS2550050A20000

https://www.rammount.com/part/RAM-B-367U

 

What Rick said. Super simple and a game changer. In my case the lightning cable runs to the HU for charging and apple car play. I use a 2 piece arm so that it tucks the phone in such a way there is literally ZERO impact on visibility either on the windshield or the side view.

 

Checked the holes in the fender and the flare. Doesn't look like they line up, maybe only a couple.
I'll check again tomorrow, too hot right now.

 

good work! Time to void that warranty!

 

How difficult was it to install that TRD grill?

 

I have an 08 indigo ink double cab ext bed. Want to change that chromy grill.

 

Got my Elka 2.0s (2-3" lift), SPC UCAs, and UCA bolts for Krave Automotive.

These things are sexy!
Thanks Krave for the care package!

















So many stickies!

 

Took it out to Moses lake and beat the piss out of it. She treated me pretty good, figured out my cooling system is a little small for sustained 4K rpm and 90 degree heat.