What Have You Done To Your 3rd Gen Today?

Wonder how long I need to wait on my new ladder. It has about 45 warnings on it

 

Did the chalk bag / large water bottle mod. This is awesome and super easy. Check out Etsy to get a good deal directly from the bag maker. She gives top notch customer service!!!

explanation thread:
https://www.tacomaworld.com/threads/tool-less-32oz-cupholder-mod.672736/

 

How are they did the squeak go away?

 

I don't mean to bust balls, these stickers all over the place just drive me nuts. It was a PITA to get the warnings off the Visors in my BMW 440. At least the Toyota warnings aren't quite as bad as the one on the back of my Yamaha Jet Boat (http://yamahajetboaters.com/forum/viewtopic.php?f=1&t=37956).

 

Can you tell me what the wheels are that you have on your pickup? I have a 2020 Silver TRD Off Road and I think those would look great on my truck. I've heard that 17 wheels with 265 70 17 tires will fit without alteration to the suspension, guessing you had to lift your truck for the 285/75/17's to fit?

 

@ORMarine

https://www.oempartsource.com/oem-parts/toyota-trd-17-in-alloy-wheel-matte-gray-ptr2035110gr?c=Zz13aGVlbHMmcz0xNy1pbmNoJmw9MiZuPVNlYXJjaCBSZXN1bHRzJmE9dG95b3RhJm89NHJ1bm5lciZ5PTIwMTYmdD10cmQtcHJvJmU9NC0wbC12Ni1nYXM=

Not my truck, but here are the wheels. He might have reproductions as they are available wider than OEM wheels.

 

I had them on my '07 for about a year before I traded it in and liked them. Quiet on the hwy, I don't really off road so not sure there, but I'll be looking to get them on my 2020 when the time comes.

 

Just order the black sticker set that covers all of the visor warnings from Etsy. It took me 5 minutes, and it looks a world better!

https://www.etsy.com/listing/763159756/toyota-tacoma-visor-sticker-blackouts
Sold out at the moment, but I would imagine back in stock soon if you message the seller.

 

Looks pretty cool, is that from the RAV4? Is it the only “adventure” trim vehicle out there for Toyota?

 

If you change your front turn signals to the VLED bulbs you have no hyper flash.
https://www.vleds.com/shop-application/turn-signals-front/7440/7443-50-hv-amber.html

 

Yeah here’s the part number.
I do believe it is the only adventure trim out there but I could be wrong. If you want the complete badge with mtn and adventure badge it’s two separate part numbers. (The picture is deceiving and shows both badges)

Here’s what I got: just wanted to be different haha
PT413-42182-02 Badge Mntn RAV4 Srp

 

I took off the rear bumper to install a steel one. I have the new one on now, but it was dark out by the time I finished so I couldn't get a very good picture of it. I'll post one tomorrow when it's light out! I should probably wash the truck while I'm at it...

 

I have those in my truck, love them.

 

How did you remove it? In a way that you could reinstall if you chose to?

 

I took mine off my Sport and left it off. Zero impact on the truck. You can have it for a day trip to northern Va.

 

So far it feels a bit tall (just a little), but more comfortable. Being in the UK at the moment i rarely drive over 20 miles and that's only to and from work sometimes so distance comfort remains to be seen. ill be adding the panel soon now that i feel ill be keeping them on.

 

OEM 4Runner Pro wheels. 265/70/17 will fit, and Yes, I’m lifted 4.5 inches for the 285’s

 

Mostly finished installing my Pelfreybilt Aluminum front plate bumper with BAMF reinforcements and Warn Zeon winch. I still need to extend the winch motor ground wire coming off of the control pack relocate so it is long enough to reach either the battery negative or the base of the winch motor. Also need some fog lights and a light bar! Had to move over to 700lb coil springs today too now on 5/4 on a bilstein 6112 setup. Was 6/5 before I put on the bumper and the winch *with 650lb coilspring* and was rubbing again.

 

It's an open hinge, with the plug door open gently wiggle it and pull up. This way at a later day you can snap it back in place.

 

For cheap stuff you can't beat it. Those stainless clamps are like $7 for a pack of 10, the fuel like hose too...cheap, $1.59 a foot. The breather union and breather itself is a Toyota OEM part, those two were $26...cheap insurance after all. When i was in California in February we drove past a Harbor Freight but i didn't have a chance to check it out. I heard they are kinda similar.