What Have You Done To Your 3rd Gen Today?

Also looks like a PRO grill with raptor lights, AND running boards?

 

I was able to catch these finally and installed them...FrontRunner Triple Load Bars on my Diamondback. Install was actually pretty easy. I have a Diamondback SE and only needed to use the nut jacks once for each of the longer rails as screw positions of the rails overlap the Diamondbacks support tubing. Very secure. Silicone'd around each screw and not worried about water. They have a solid gasket as well.

 

Since I’ve last posted in this thread, did a 2” OME lift, 265/75r16 pathfinders, 1.25” spidertrax spacers, softtopper, sleeping platform and last but not least some diode dynamics ssc2 sports for ditch lights.

this coming year I plan on getting wheels, diode dynamic’s ss3 fogs, scene lighting on my prinsu, and possibly some reverse lighting. Then I should be mostly done except for maybe a rear bumper.

 

FYI Headstrong now has their 3 leaf aal back in stock. Better hurry if you've been wanting one. They also have the 1/2" shim to give you 2 full inches of lift if you so desire. Got my order in.

 

Did a little cab mount chop with a good friend TacoTRD. He did the welding, I made the cuts. I tried to lay my first bead and it was terrible. I'm sort of hooked now. The process was fairly easy just have at least 3 fresh cut off wheels per side and a fresh flapper disk. I'm considering making the install video after the new wheels/tires go on. I still have to cut the fenders. I thought it would be a good idea to cut the lower fenders once the wheels are on.

 

Thats a clean CMC. The welds look better than the rest of the frame welds

 

Q: So...does the "follow me" function not work if you have the controller inside the cab? I've been meaning to try it out (older Phantom 3). Just curious as to why you'd have to control & steer at the same time?

 

Dayum! That bumper looks great, what did you use to trim out the plastic that you cut?

 

I don't have that feature on the mini. Honestly this whole thing was just a thought I had. It's only for those low speed shots directly above the truck through the trees. I have someone who could drive the truck while I get the shot if I needed it. I'm going to try it tho.
Zim

 

the chrome delete is a must imo. the interior just looks so much more complete without all the shiny bits

 

Honestly, I'm not sure (I don't think so though). I haven't installed it yet. I still have to prime and paint the bare metal and have been waiting for a warmer day. Supposed to be close to 60 Wednesday, so I think that's when I will try to do it. I know the front part installs to the cross member and there is another bracket for towards the back. I will try to update here once I do it, if not try to check out my build page.

 

I cleaned my truck yesterday, ha.

 

That was my problem when I had the BajaRack on my FJ but it shouldn't be an issue with the Prinsu, you can take off the cross beams and wash/clay/wax when you have to.

 

I saw this on Facebook, but thought it belonged here as well:

 

Yay Benny.

 

Looks fun

 

And debadged.

 

It's the fab four premium with full guard.

It's complete ridiculous overkill. But i lurve it.

 

If you want to mount under the hood make sure your pump is weatherproof. A lot are not and will seize up.

 

You don't even have to remove them. Just loosen them up some and they slide around enough to wash and wax underneath. I do it once every year to to make sure the paint is safe.