Eibach pro lift kit

Little bit of both. The angle of the pic and the tires and wheels in the bed gave it a squat. It leveled out a once I removed them.

 

Anyone have the Coilovers 2.0 on a 2.7L 2wd?

 

This is fantastic

 

I will say though... I don't recommend setting it to the top notch without weight on the front. It's pretty damn stiff right now! But, I plan on either getting a Ranchhand or going down to the second notch pretty soon. Other than that, there is plenty of clearance for 33s with this kit and I'm super happy with it!

 

Are you running stock UCAs? Good to hear there's plenty of clearance w/ the -10mm offset wheels and the more aggressive KO2s

 

Yep. Stock UCAs! Aligned just fine.

 

Totally satisfied with the Eibach kit. Great value in my opinion.
STT 285's on 0 offset Methods - that's it, stock UCA's for now, but no rub whatsoever as it sits. Add a leaf in the rear.

 

Great pic looking sick

 

Which notch are you on in the front? Here's mine set on the top.

 

Nice! Hows the ride? Are you using stock UCA's?

 

That's nice.

I'm on the middle notch. I imagine I would have been fine on the lowest, but my next move is bumpers so just figured that'd be where I want to be, but that said - I'm fine with how it drives on the 2nd notch - maybe I'm not as picky as some, but in any case, I dig it. Also, if I were doing it all again, I would skip the AAL and get some better springs...Newb move, live and learn... luckily they are cheap so not a huge loss, but will upgrade at bumper time as I have some weight back there with the Decked and a bunch of crap in the drawers, and I think I'll go with swing arms on the bumper so...

 

The ride is pretty stiff without any weight in the front, but I plan to either go down a notch soon or get a Ranchhand grille guard installed. Still love the kit though! I'm using stock UCAs too.

 

Anyone got pics of the Coilovers 2.0 installed? Decided I’m going to go that route paired with spc UCAs.

 

Yup, a whole thread on the Coilover 2.0 here should match well w/ the SPC UCAs

https://www.tacomaworld.com/threads/eibach-pro-truck-coilover-2-0-stage-2.673107/

 

Sweet thanks! I’ll check it out.

 

Sounds like some deaver leafs are in your future

 

I would definitely recommend the SPC UCAs. Let me know if you want the 2.0 coilovers for $100 off retail.

AZ Classifieds

 

I’ve had this kit on since 2019. Clip on lowest setting and Deaver AAL in rear. And on 2657017. Tires look too small so I decided to order 285s. I hope it doesn’t rub or slightly rubs but if it does I don’t wanna do the CMC. It’s either raise the clip to 2nd notch or use 1/2” spacer on top. If I use the spacer, will need longer top hat studs. Either way the spring has to be removed from the shock.

 

I do not rub at all with 33x12.50r17s, which are about .3" greater in diameter and more than an inch winder than 285/70r17s. However, my aftermarket wheels are -10 offset. I believe this is the reason why I don't have any rubbing on the plastics, cab mount, or UCAs. I'm on the top notch too, but I plan to go to the second notch. There is more than an inch of clearance between my tires and the cab mount at full turn so going down to the second notch won't change much in terms of clearance other than maybe needing to cut a tiny bit of plastic.

If you keep stock wheels and 285s, you may need wheel spacers to push the tire out away from the UCAs, but I'm 99% positive you won't need to do a CMC. The rear will clear them no problem too. Hope this helps.

 

Well my wheels are 17x7 4 runner Pro wheels. I do have Spidertrak wheel spacers that I had on but took them off several months ago thinking it was the cause of a vibration. Turns out the 1 inch block at the rear diff was the culprit. Removed that and did the AAL and vibe is gone.