Let's See Some Softoppers

Definitely best ~$10 I’ve spent on a mod.

 

Awesome! Appreciate the reply. Was figuring this was the case but wanted a bit of confirmation. Thanks again.

 

thanks I appreciate it, I’m going to order right now

 

This amazing dude is making PnP harnesses for 3rd brake lights if you don't want to splice into OEM wiring.

https://www.tacomaworld.com/threads/plug-and-play-brake-light-taps.707529/

 

Anybody have a solution for reattaching stripped out snap screws? One of mine finally gave up and a few others are on the verge of getting pulled out from the aluminum railing.

 

X2. Mine are about to let loose. I’m wondering if I can pop rivet them in.

 

https://www.tacomaworld.com/threads...gen-tacoma-today.6499/page-9204#post-21246825

This is what i did
I don’t leave my topper on all the time

 

Everything they said, except I didn't want to permanently attach it to my brand new purchase. Instead I attached it to a thin steel bar, and I have rare earth magnet inside the topper holding it in place. Rock solid and good for my commitment issues.

 

I’m thinking the same thing.

 

New
I like those ideas, how did the wiring go? I just bought that light in the link. And I see it has 4- wires I want to know theorientation. Also the metal plate withmagnets sounds like a good idea

 

Has anyone had issues, or found a remedy, for this? Just got a softopper put on and within about two months the flap at the front has rubbed off the paint on my cab. When the wind hits that front window it pushes back a bit and that flap kicks up and rubs. Did I install it incorrectly? I have the other flap inside velcro to the inside bed.

 

Ordered my Softopper today, cant wait to install it.

 

I haven’t notice anything on mine but I’m going to check today now that you mention it.

 

Hey guys I’m having issues with my softopper because I keep getting dust inside the bed of the truck when I go on trails I know it’s not going to keep 100 percent of dust and dirt out but I have a feeling I installed it wrong any tips and tricks are appropriated! Thanks

 

Looks about right. They don't seal 100%. Dust is really bad and will get everywhere

 

I was thinking of moving the rails more towards the cabin of the bed to close that small gap

 

Touch it up and then cover with some paint protection film. I use this anywhere it has contact with paint or I notice rubbing.

XPEL Clear Surface Protection Film Roll, 6" x 84" - Polyurethane Surface Wrap Protects from Damage, Chips, Scratches - Safe for Vehicles, Countertops, Appliances, and More

https://www.amazon.com/gp/product/B0748QNCW6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8

 

Seal around your tailgate. It helps. I used the ESI ultimate tailgate seal. Helps for those really cold night as well if you're planning on sleeping back there.

 

Anyone know if these snap screws for the front flap will work https://www.homedepot.com/p/General-Tools-3-8-in-Screw-Snap-Fastener-Kit-1267/204764017? Got mine used and initially had a spare tire that kept the flap in place. Relocated the spare, now the flap untucks and flies backwards into the bed.

I’d go through Softopper but $5-$10 plus shipping for a few screws? I’m good.

 

Probably just measure what you need and head down to ace hardware.