Plug and Play Brake Light taps

I am editing this post to reflect the interest list for the next batch(es).
Still going to be $25 shipped, so that isn't changing, just rewording to reflect future ordering as opposed to the original batch.

Also, just came back from the Post Office. I can ship to Canada for an extra $10. So $35 shipped to Canada

These are plug-and-play to tap the brake light for the addition of a topper, bed rack, tailgate light bar, whatever you want to light up when you hit the brake. They are using the OEM circuit, so be aware of amperage. They have two 18 gauge wires (positive and negative) that are unterminated and ready for whatever you want to do with them.


Update: 2nd gens available here: 2nd gen Brake plug-and-play brake tap | Tacoma World

And here is my list as it stands for now. I'll update every few days, so feel free to post if you are interested.

0. @Jaime.portillo (replace a lost one)
1. @Bgrif119
2. @Dammit Evie
3. @calzonical
4. @TacoPharm
5. @530Taco
6. @alisonnm
7. @rfat3000
8. @roundrocktom
9. @99ranged
10. @whup
11. @get-er-dirty
12. @Cardenas27
13. @evdog
14. @doublethebass
15. @Reedo311
16. @Diverdave43
17. @Fretter
18. @Kremtok
19. @smdcbr
20. @blocke
21. @ripRavioli
22. @MilkDud
23. @Taco1701
24. @brunssd (Canada)
25. @tacosandhotsauce
26. @86 SR5
27. @smorris924
28. @Slideeslide
29. @nrsheare
30. @trev4vis
31. @19QUICKSANDTACOTRD
32. @jcmotr
33. @teledeluxe
34. @Kit_Carson
35. @codemancer
36. @TechLizard
37. @OilCapital2021
38. @Nogoodnic

 

OP, sent you a DM. Thanks

 

IN

 

I will make yours special. So it won’t count against the original.

 

In as well.

 

This is a great price, I spent more piecing the connectors / terminals / seals together on my own in single quantities. Throw in that Puppypunter has pre-assembled and crimped it for you except for the bare leads that are going to your added device and it's a no brainer.

Just say no to cutting your trucks harness, use this instead.

 

Count me in!

 

Thanks! I try to be fair on the pricing. If you were to DIY, it would probably cost at least that (actually, given that I can't source the male connector stateside, with shipping that is $25 alone)

 

Definitely in

 

Me too!

 

IN for one.

 

@Bigdaddy4760

 

In for one

 

Cool, I think that covers the original 5 (maybe more? I have a few extras that will be ready in minutes, so no worries if I went over 5). If you are still interested, feel free to reply and I'll note you for the second batch

 

Do you make any that tap the reverse lights?

 

Paid thanks

 

I'm interested, LMK!

 

@memario1214 can hook you up with a reverse tap. If his isn't what you are looking for, let me know. Custom odd stuff is what I like to do

 

OK, so I have the following people down for these on the first batch:
@crazyfingers
@B1sko3
@Tacospike
@CAG Gonzo
@tacowiz
@Frsh2df (place held for customization)
@Bigdaddy4760
@Skydvrr
@E.J.

A couple of those get different terminations, but I should be able to cover everything there. Thank you guys so much! I will get these shipped by Monday and will send everyone the tracking info. For everyone else (hopefully I didn't miss anyone before I cut it off. If I did, please let me know) if you are interested, reply below. I can also do 2nd gen brake light taps, but sourcing the stuff is on hold until hi-1000ec resupplies.

 

I think you missed me, but I can wait for the next batch! Thanks so much for doing this!