6" lift kit under $800?

Is there a good 6” suspension lift kit for under $800

 

Maybe a 3" body lift and a 3" spacer. Not sure.

 

Stacking the spindles on top of my lift will be safe to drive and not going to be easy to break?

 

Itll be fine as long as you can keep your alignment in good numbers. I ran maxtracs with lift coils for a few years on my old prerunner. Had a total of 5.5inches in the front and it drove great.

 

https://www.tacomaworld.com/threads/maxtrac-spindle-lift-for-2nd-gen-prerunners.203889/

 

Maxtrax spindles are definitely a great solution for what you want. They are way beefier than the stock ones too

 

What should I do for the rear?

 

No

 

Get a set of leaf packs etc. Deaver, Dakar, Alcan, or all pro. Or an add a leaf and some lift block. All depends on your budget. But to lift the front and rear you're looking at about 12-1500$

 

You'll have $100 left, so maybe a 5" block.

 

So I might as well just buy a whole new lift kit? Or would it still be better to go with spindles and leaf springs?

 

Just get spindles, leaf spring and rear shocks

 

This ^

 

How little do you care about your truck?

 

I care about it a lot. I want it to work good and look good

 

This is unrelated but I feel like it needs mentioning.

If you love your vehicle and want it to keep looking good and working good, then the best thing you can do for it is have $5k in the bank that is strictly there for car repairs.

I'm not assuming that you do or don't, I'm just mentioning it. It ain't sexy, but it'll keep you on the road longer than any lift kit will.

 

Probably not what you want to hear but with your budget you can make it look good or you can make it work good (maybe), but probably not both.

 

Take that 800 and buy a bunch of Dogecoin. When it inevitably goes to the moon you will have enough money to buy a real lift.

 

I currently have a rough country 5 in front and 4 in blocks in the rear it drives like garbage I could only imagine a 6in. I would stick to a 3 in suspension lift without blocks and new leafs but thats $1600 for the bilstein kit.

 

Will you need extended brake lines for a 6 inch lift?