2020 Tacoma OEM LED Headlight Megathread

ahh Gotcha, thanks for that info. Makes me feel a little better!
Just got done talking with my local dealer and they are going to price match OEMpartsource for the head lights!
I should hope to have them in my hands next week or the following!

I will probably post up some more questions about ripping my front end off when it gets closer.
Thanks again for yours guys info!
I am over the halogen bulbs.

 

I can link some YouTube videos to help as well.

 

You don’t have to rip the front end off, it’s only a few screws. You can easily install them in under an hour. I watched this video before starting and it was a breeze: https://youtu.be/bhGlwKRlAYE

 

That was one I was going to suggest. Really all you need

 

Thanks guys!
I previously saw this video in the thread several pages back and now book marked it.
I will follow up once its done, or if I have more questions.

 

2021 non-LED headlight got damaged due to minor accident. Will the LED headlights plug/play? Or do i still need some kind of conversion harness?

 

They will not plug and play, you will need an aftermarket harness. I got mine from xrunnerdude67@gmail.com

 

After reading through this thread, just want to make sure I got it correct.

NON TRD Pro LED Headlights
81110-04290(Right LED Head Light)
81150-04290(Left LED Head Light )

TRD Pro LED Headlights
81110-04300(Right Head Light that says TRD)
81150-04300(Left Head Light That says PRO)

A new wiring harness is required for Sport / OR models
There is no wiring harness for SR / SR5 models yet

 

Looks right for the part numbers

for the SR5 harness see below

OEM LED headlight conversion harness for SR/SR5 | Tacoma World

 

And I’m about ready to make a BST thread for a 4th TRD harness option with integrated grille (Rapture) light harness. The known 3 are listed in the DIY thread.

 

Just ordered a harness from Mike, wait time is about one week, in case anyone is wondering.

 

Looking to buy some LED headlamps from a 2020-2021 Tacoma.
Let me know if anyone has a set for sale

 

Probably won’t find too many if any, but I’ll keep an eye out

pro or non pro?

 

Non pro
Thanks I appreciated

 

Hey guys, I was looking at the passenger side headlight guy wiring harness, I see one plug that doesn't go to anything, least that's what I came up with. Attach is the plug by the windshield washer reservoir.
Please can someone confirm this stays unplugged?

 

yup that’s not headlight related

 

Ok that makes me feel a bit better, but what the heck does it go too? Other see that when they did the swap?

 

Is this your truck or someone else's? It's some video of the installation where you're noticing it?

It looks to me like it could be the female 6 pin MX150 which plugs into the LED headlight (the other end of the conversion harness) but that's a tough photo. Some additional context?

EDIT: Actually, looking at it again, I think it's the sidemarker. You cap that with a male or you cover it with tape. I am pretty sure mine is grey so the black threw me off but OEM connectors come in black, white and grey depending on the batch. 99% confidence that is a female sidemarker which feeds the OEM Halogen but isn't needed for the OEM LED. For the LED housing, the sidemarker is fed from parking light which comes through off the DRL connector (as you need the DRL wire for DRL capability so might as well tap there for parking light vs an additional connector in the conversion harness.

If this isn't your truck, as mentioned before, you got this bro! We will walk you through any trouble, just take your time and if you hit a snag post up.


My colors are potentially different than others but connector-wise, clockwise from the bottom, female MX150 feeding LED headlight, DRL, H9 high beam, H11 low beam, Turn (grey)

 

Hey there!
Thanks for support. It was my truck. I just finished the install and noticed it..
I had one of mike's clips break on me
I just reached out to him about a replacement.

Yes the driver side didn't have that connector I noticed.
Let me know if you want anymore photos, but the new headlights work fine. I was just concerned it was left out in the open like that..

For the meantime I just taped the connector together until I get the replacement.

 

that connector is for an accessory or something your truck doesn’t have. It was never plugged in.