What Have You Done To Your 2nd Gen Tacoma Today?

Work on tinted windows?

 

Surely the front end isn't hitting the bumps during regular braking? Are they much taller than OEM?

 

$free fitty - https://www.tacomaworld.com/threads/simple-sleeping-platform-cheap-works-great.108524/page-5
dig through there. Tons of good ideas. This is my second one and I've done the same one twice. Two sheets of ply cut to fit the bed, wrap them in carpet, a 2x8 cut to fit in the factory notches of the bed for supports underneath and your done.

 

They are taller.
Just look at a pic of one.
Takes 5 min per side to install.
Got mine when I was putting on some 5100s.
I put the bump stops on before the 5100s and I was so glad I did because I would have thought the 5100s had made the difference.
Wish you could try it.
Night and day improvement.

 

Rear 5100s finally installed . Now I have a full matching set front and rear. Getting the top nuts off what is a pain in the ass. Had to remove the top rubber bushing and use vice grips to clamp onto the threads to get it completely off.

 

Found this deal on Wheelers u bolt flip with their super bumps a couple weeks ago.
Go through Low Range Off-Road WOR-306957 for $174.47, verified, mine arrived couple weeks ago .
You need to go to this page and then add the Super Bumps.
https://www.lowrangeoffroad.com/whe...ble-with-or-without-superbump-bump-stops.html
Deal.

 

Taking a road trip today.

 

Shoulda used one of these..

 

Just about finished. All that’s left is waiting on fiberglass fenders and some lighter coils.

 

Gonna need a new jack with all that droop

 

Installed Passenger side seatjackers

 

Luckily this still has enough to get the tires off of the ground by a couple of inches. Harbor freight ftw

 

I have 700s on my Pig and she just floats along... I'm a little heavy though once the BudBuilts are on.. Have any plans for upgraded bump stops?

 

I had 600s on my oem kings and it was awesome, so they should be good on the LT too. Right now I have super bumps and that’s all I’m planning on. Eventually I would like hydros and bypasses but that’s only happening if I move west and get into more fast stuff.

 

Making rethink really hard about swapping to LT. I keep saying I'm going to do it then I don't. Lol

 

I came into a lump sum of money that was just enough so I pulled trigger. If I had to save for it, it would never happen. Do ittt

 

Might be something to spend my Christmas bonus on this year.

 

I used a dremel and cutting wheel to cut the nut in half, it was seized on pretty badly.

 

Washed the outside & cleaned and used 303 protectant on the inside of it. Also did the same on my Crosstrek and my wife's Lexus nx300 fsport.

 

Well....and an alignment too....lol