What have you done to your Tacoma today? 1st Gen Edition

Because you don't demand it.... what's the worse they can do, fire you?

 

Well. Technically. Yes.

 

Hey, would the Patriots fire Tom Brady...? Oh $hit, wait, never mind.

 

sadly dealer life is like being in the mafia.. they dont play by normal employment rules

 

More stickers from Cboy808!

 

Link???

 

Celebrated CANADA DAY July 1

 

https://www.tacomaworld.com/threads/custom-stickers-made-in-hawaii.626268/page-15#post-25913599

 

Thanks brother!

 

Took the Tacoma fishing today

 

found out my evaporator has a leak, should i shell out almost 200 for a denso replacement or will a rockauto (four seasons) evaporator work just as well?

 

Denso tends to be more reliable. And that job isnt one that I’d like to redo. (Granted it’s not that bad. But still)

 

Mmmmmmm. Fish tacos.

 

Whichever way you go, I'd also replace the pressure switch and expansion valve while you're in there. As @Empty_Lord mentioned, it's not a terrible job, but why dig in there more than once if you don't have to. And all new o-rings as well. And, consider a new receiver/drier, since you're supposed to replace that any time the system is not holding pressure.

If you've not done it before, I took a bunch of photos when I went through the process. Shout if you have questions.

Replacing the A/C Evaporator Core on a 1st gen Tacoma

 

awesome thanks for the info, did you go with a denso unit as well? I got the expansion valve and o-rings, Ill have to order a drier and pressure switch.

 

I originally went with an OEM condenser, because I figured the first one lasted 18 years so might as well "do it right." Unfortunately, the OEM one I got leaked out of the box. Because I was headed out on a trip in 2 days, I got the only one available at any parts store for 50 miles. It was a NAPA Temp, which I wasn't super thrilled about, but I had no real choice.

At any rate, one thing I noticed with it - that I didn't notice with the OEM evap core - was that when I removed the "cap" on the two holes where the expansion valve connects, it was like opening a pressurized can - air rushed in. Clearly, these things are meant to be shipped with a vacuum, and hearing that sound is a good indicator that you've got one with no leaks.

The evap core has been working great ever since I installed it, so ultimately I saved quite a bit over OEM...but if I did it again and had the time, I'd probably go OEM or Denso, just out of reputation.

 

Does anyone know where I could find 2 of the longer shackle pins?

 

Anyone rebuilt their power steering pump on the 3.4, is it the same as the one on the 2.7? I found this thread, but wasn't sure if it was the same: https://www.tacomaworld.com/threads/power-steering-pump-rebuild-how-to-with-photos.377002/

Also any recommendations on quality rebuild kits or is it better to piece together my own?

 

Changed the fluid in both diffs.

first time I’ve done that in either truck in a combined total of 150k miles driven


Now I just need to put the skid plate on and it’s done till I swipe my card in a winch

 

wait nm, different kind of wench