What Have You Done To Your 3rd Gen Today?

I've never done audio before but want to do the upgrade myself. Are these plug and play? Any tips?

 

100% plug and play. Have a 10mm wrench handy for the far bolts (close to the windshield); there isn't a whole lot of space up there.

Here's a decent guide that I watched while awaiting delivery.

I also invested in

$13 Auto Trim Removal Tool Kit - 5-Piece No Scratch Pry Tool Set for Car Panel and Dashboard Removal - Includes Door Panel Tools, Push Rivets, Car Clips - Essential for Interior Trim Work - Blue

these trim piece removal tools as I have a few interior mods planned.

 

I installed and tested the bed mat and OEM electric tailgate lock. The bed mat did a great job holding my chicken on the way home.

 

Sweet!! Just got mine in last week. Time to hit the OBX!

 

What notch do you have your eibachs at?

 

Finally installed my speakers that have been sitting in the shop for over 6 months


Backing into the garage like I've done 1000 times before and today was the day my mirror got a little too close to the side of the door frame. Hit it just right so it didn't rotate back and instead smashed the corner and broke the glass and plastic. Anyone know of a good replacement site? I need a heated, non BSM mirror

 

2nd notch, no issues with alignment

 

Wife sewed on my steering wheel rewrap and put on the tri-colored toyota emblem to give the face of my truck a POP! Plus they match Hawaii plates

 

Man, this hurts to see. I had the exact same thing happen to me, ended up replacing a good portion of what you mentioned.

I ordered the replacements from Bam Wholesale and installed myself, as the dealer wanted near $500.

Best of luck.

 

Do you have a link for these lights

 

https://spottermirror.com/p/toyota/2016-2020-tacoma-2014-2020-4runner/

 

https://hotshotoffroad.com/collections/2016-toyota-tacoma/products/ss3-led-fog-light-kit

Support our TW Vendors! Pretty sure they are still running the labor day discount until midnight!

@memario1214

 

https://tinyurl.com/4urzmkb2

 

Easy to do and cheaper at BAM Wholesale. Don't drop your socket down the air conditioning duct.

 

Or if you don’t care if it’s OEM, this is a good quality knock off. I’ve had one on my passenger side with BSM since May of 2020 with zero issues.
https://www.partsgeek.com/ss/?i=1&ssq=TO1321349

 

Just a heads up, it you have the light sensor in the passenger side tweeter cover, it’s a pain in the ass…

 

Nice headlights

 

here is the link for the SS3's. today is the last day they are 15% off.
https://www.diodedynamics.com/ss3-led-fog-light-kit-for-2016-2021-toyota-tacoma.html

 

Curious about the bed light switch. Did you wire up the older bedlights or the newer ones? Or is this just a stock photo? 17s didn't have that feature.

 

Stock feature on the double cab, I believe.

https://www.tacomaworld.com/threads...s-using-double-cab-cargo-light-switch.436440/