Ontario BS Thread

I looked through that thread and was able to answer most, if not all, of my questions and concerns. Thank you!

 

Oh you, shush I’ve got new meats now - ready for round 2, probably going to get stuck worse

 

Brakes back to normal on the rig again.

Keep that brake fluid res at or near the max line

I had it just below the max line, like a derp. Last time we went out I got the truck on some steeper angles Got air in the brake system.



Many times pushing 'go' on Techstream for the active test.

 

Good to know, especially with 4Runner calipers pushing more fluid...

 

It was 2 footing, gas + brake on one of the harder obstacles going up to your signature pic which led me to have the air in the brakes.

 

I have those and run them all year. They work well in snow and I'll use 4hi if I need to so haven't felt a need to get snows but I guess it depends how much snow you drive in. I would say try it first and see if you need dedicated snows, save some money possibly.

 

Factory 37s with LT (note the long arm rear axle links). Unfortunately it'll probably be a $100K vehicle when it debuts here: https://thebronconation.com/forums/threads/bronco-raptor-first-look-with-less-camo.7575/

 

A sawzall and a bit of time and you can have 37s too for less than 100K

 

Step One: Take the shrinkwrap off the Canadian Tire welder I bought two years ago

 

Step two get some argon gas and regulator, flux core welding is too hot.

 

@llamasmurf

https://www.youtube.com/watch?v=TOblxqMYNtE

 

step 3: ???????


Step 4: Profit!

 

Step Three is where you promise 3 week lead times but deliver after 3 months, citing corona-driven material shortages and bad powder coating shops...

 

You can have a tray bed...but only if its a Colorado...

I decided to check out North Crawler after seeing these ads, for as little as 30k, you too could have a tray/camper thing
https://www.northcrawler.com/product/crawler-cmp190/

 

Step 4 you take full deposit and then

Warning about CORE OUTFITTERS INC-Nathan McDonald Now associated with “Truenorth Outback” | Tacoma World

 

North Crawler is from Sask.
not sure where the frick the colorados are from but this is bullshit!

 

I only check up on that thread once every few months because I am not financially involved....but OMG some ppl just don’t get it. CORE fucked us, therefor anything CORE related = BAD.
I feel like a flow chart may help (although some pplz cannot be helped because they don’t fucking listen (or read in this case)).

Looking forward to updates, just gonna sit back, ,

 

Which step do you cannibalize parts from one customer's vehicle to build another customer vehicle in a truck ponzi scheme?

 

After changing your name for the third time

 

talk about ugly....