What Have You Done To Your 3rd Gen Today?

Found it:

If I can trace that wire into the dash, I should be able to use an arduino to pass 12V+ on that black wire during startup and fix the cruise control. Seems like a waste of an arduino though... Maybe I can have it do other things too.

 

Add a block heater while you are at it! Ohh! Warm air from the heater right from the git-go!

 

For normal cruise instead of adaptive you can just hold the set button down instead of just tapping it. If that's what you're looking for.

 

Thought about it, I would love to relocate my front sensor back up a little higher and then put a hinge on the garnish that would have a plug for block heater and a plug for my 12v charger.

 

While I'll probably end up with that kit, $85

Oh, I know how to switch it manually. I just don't like having to hold the damn button for 3 seconds every time I get in the truck to select the version of cruise control I prefer. It should be selectable, but it isn't. So, I may have a way to *fix* it.

 

Have you heard of CTEK chargers? You'd still have to fabricate something with the block heater though.

$13 CTEK Indicator Eyelet M8, LED Indicator Showing Battery Charge Status, 8 mm Eyelet, Permanent Connection for Hard-to-Reach Batteries, for All 12V Lead-Acid Batteries & CTEK Chargers up to 10A

https://www.amazon.com/dp/B002MT8S7...&pd_rd_r=10e35820-75f3-4b64-8db8-fee2216479ed

$19 CTEK (56-304) Comfort Connect Extension Cable, 8.2 Feet

https://www.amazon.com/CTEK-56-304-Comfort-Connect-Extension/dp/B00ADIHUVG?pd_rd_i=B00ADIHUVG

$20 CTEK (56-870) Comfort Indicator Cig Plug

https://www.amazon.com/CTEK-56-870-Comfort-Indicator-Plug/dp/B009K2QX0U

$90 CTEK MXS 5.0, Fully Automatic 12V 4.3 Amp Battery Charger and Maintainer, Unique 8 Step Charging, Simple Plug and Play Operation, Desulphation Function with Built-in Temperature Compensation

https://www.amazon.com/CTEK-40-206-...00CD44RQO?keywords=ctek&qid=1639291899&sr=8-3

 

Do you have to run spacers with the stock wheels?

 

What setting are you running on the front bilsteins the RXT in the back, and how much lift did you get? I ordered the same parts except SPCs instead of JBAs and will be installing soon.

 

Which interior mount did you use for that?

 

well, you find an affordable way to fix it without having to chop into a bunch of ECU wires and have me programing Arduinos, I'll be the first one in line to buy it!

What I'd really rather have though is a way actually program the ecu to track speeds for larger tires and gears w/o stupid inline adapters. This way my speedo and cruise control readout are the same.

 

So there was 1 sticker on the canopy rear window, easy to take off minimal adhesive easy to remove but there was always this weird outline/ghost (only noticeable when wet) and there were 2 other spots that must of had a sticker at 1 point. There was also some kind of film at random. Clay didn’t work, a razor didn’t work so finally decided to take the cutting pad to it and that Made a huge difference in clarity but I’ll have to check the “ghosting” tomorrow.

Quick tape job so I’m not doing a bunch of cleanup after

 

Caliraised made by Meso

 

Hey. I went with 6-5 in the front got about 1.75 after settling a bit. Out back I got just over 2 with option 1.

 

Installed the new rtt with a couple friends yesterday; good times. So glad I held off from upgrading to a hard shell tent the past three years until this Condor Overland came out; I can’t wait to use it in the wild. I’m really liking it so far. Fit and finish is nice. The Roofnest customer service has been great and the Roofnest flock has been good… so far. lol

 

Bet that makes it easy to do a wheelie.

 

Nice! That MR2 Spyder in the background tho

 

Also...9 out of 10 of his neighbors agree, walking behind his truck leads to a severe headache.

 

love the lights and the truck. Nice job!