OEM intake box grommets

So I purchased a Injen CAI to replace my K&N CAI and I ran into a serious issue. The Injen utilizes the highlighted parts below to mount the box but the previous owner threw those parts away when mounting the K&N because of different mounting positions. The bolt is the easy part because the part number is right there. However, N04 is not the part number for the rubber grommet. Has anyone run into this situation and know simple solution?

 

Might be easiest just to call your local dealer and see what they can source you.

 

There suggested was a junk yard because they do not sell the grommets. You have to buy the whole intake. I was hoping someone had experienced this and was able to find a work around or the correct grommet somewhere. Best case scenario would be someone having the grommets and bolts lying around and they're willing to part with them.

 

Can you post a pic? I will see what I have and if I do I will ship it to you.

 

@mds08 there is a pic in the original post with the parts needed highlighted. If you can't see it, let me know and I'll try to find another way to send it. Thank you.

 

Check this thread - looks like someone had a workaround

https://www.tacomaworld.com/threads...et-part-for-air-intake-rubber-grommet.685377/



https://www.mcmaster.com/rubber-isolators/mount-type~press-fit/

 

I see the pic now. Will look Saturday when I get back home.

 

@mds08 you are the man!!

 

Might be Sunday.

 

Hey what's up man I actually just went threw the same thing, believe it or not the V6 Toyota Camry and take box has exact same garments. And they feel like a glove at least mine did for my intake system and they bolted up everything was just fine