What Have You Done To Your 3rd Gen Today?

I had same size tires, I was sitting at 35 from ground to fender, centered at the wheel center.

 

1/2 qt low from the factory! Wow, good thing you changed it. Now I’ve got something else to do.

 

It was for peace of mind only. Especially after hearing other stories on here about it.
Ok done with the powder coating. Looks good to me.

 

Looking good!

 

where did you get your seat covers?

 

Installed new wheels and tires along with black out covers for the TACOMA and V6 emblems.

Rocktrix RT110 17x9 -12 offset w/ Wildpeak 265/70/17s.

 

Looks great! I’ve been considering switching to a -12 offset with bronze wheels on my white Tacoma too.

 

Installed Runnin4Tacos electric tailgate lock and swapped out my all white Meso V2 map lights w the dual color. Can any of y’all confirm whether or not the red light will ever come on first (default)or do you have to press the maps to switch them to red always?

 

Www.shearcomfort.com

 

Late to the party and I'm not the one you asked but I cut mine out by hand.

 

Oh shit. You're good with a knife

 

I just bit the bullet and purchased the vehicle dynamics rxt leaf so any install tidbits would help. Paid 404.00

 

Just installed a high clearance rear bumper with a full swing out to carry a full size spare, Jerry can holder and fold down table on it. As well as my new sliders from Brute Force Fabrication. Great products and people. Drove up to them to get it installed. Just need to add a camera relocation kit to the swinging since my tailgate back up cam is blocked now.

 

$404 for an AAL or leaf pack?

 

PICS

 

Worked all week at work doing a little at a time between vehicles. I went the poser route on most things! 5500k HIDs, diode dynamics ss3 sport pods, TRD pro grille, and the newer pro tail lights. Also upgraded my reverse lights! Not pictured is the MattGecko bed lighting kit and the Hikari LED high beams (this is more of a *I wonder if they are better?*). In 2 weeks, ill be installing the Eibach shocks and rear AAL for a 2" lift.

 

https://www.tacomaworld.com/threads/the-ultimate-tacoma-lift-guide.509171/

 

For the LED high-beam upgrade, might want to doublecheck that they are clocked correctly. The OEM bulbs cast light in all directions so the bulbs can be clocked in any direction the manufacturer wants. LED's typically don't, so they tend to have a grub screw on the housing that allows the LED stalk to rotate separately from the housing. It can be finicky and time consuming, but you might find that the clocking from the manufacturer is not ideal for your specific application. A little clockwise or counterclockwise could be the difference between "I wonder if they are better?" and "Oh, ok, that's not bad at all. Nice."

 

Absolutely. Thankfully I can see them clearly being in the high beams. They don't sit at a perfect vertical, maybe a 10* angle. I'm heading out shortly to do a drive with them, and will try them *tight* at the full install position along with them straight up and down. The dash cam will be running, I may upload the video difference if it's noticeable on the cam.

 

Adding to my kitchen box