What Have You Done To Your 3rd Gen Today?

Finally finished removing all the stickers. Also used my old matte black touch up paint on the screws…will have to touch it up again after reinstalling. by

 

So what was your process? I just told the wife I needed to use her iron real soon. I don’t even know how to turn it on. She asked why and I said I think I will be working on my truck with it. She was puzzled and I never explained

 

You didn't ask me, but I just did this mod as well this weekend. I used a hair dryer on high heat. Worked very well for me.

 

I just put black decals over mine. 5+ years later, still holding up

 

First time I tried on the smaller ones I peeled it off then used googone and scrapped and scrubbed with blue scouring pad. It’s more work but safer (was hesitant to do this mod) than heat. Then I tried iron on the other ones and it works better and less clean up. Either way, just heat, peel and clean with googone. It’ll be less chance seeing residue.

 

Installed cement door handle covers from AJT.

 

Per the manual, the first oil change is 10K. Many people do a 1K or a 5K. I always follow the manual and I've never had a major issue on any car I have ever owned.

 

We enjoyed some Tube together…

 

My manual says every 5k or 6 months or 10k or 12 months whichever you reach first

 

Installed my Meso Customs v2 Ultimate map lights and dome light today too

 

Installed my Garmin Dash Cam Mini 2 with the Dongar dongle. Can't see it at all when you're sitting in the truck, and the dongle made the install a breeze.

 

I did the exact same thing on mine a few weeks after I got it. I personally like the fully de-badged look a lot. Clean truck!!

 

Installed some Desert Does It seat jackers. Just finished the install which was super easy, everything fit as it should with no problems. Install took prob 10 minutes.

Haven't driven the truck yet with the jackers installed but just taking a "test sit" in the truck I like the feel. I feel like I'm sitting more "into" the seat now and not just on top of it. Official decision will come tomorrow once I go for a drive.

Pics or it didn't happen....

 

Whoever invented that adaptor is a very smart person

 

Just the fronts? I thought these were usually for people with the manual adjustments

 

Only the driver seat so far. Even with the power seat adjusted all the way up I didn't have support under my legs near my knees.

 

How did you get them to stick? Mine wont stick like they did in my 2nd gen.

 

I had the same thing happen when I did the viper cut to my front bumper. Halfway through then it got scary. Fortunately it still came out good.

 

Is that lunar rock? Looks REALLY sharp with the bronze wheels. NICE!

 

Thanks man. We’ve had it for less than a week when I debadged it. Did the same for the old 04 Ram and my 12 Charger. I prefer the body lines of a vehicle, not stickers.