What Have You Done To Your 3rd Gen Today?

You’re just hanging in the wrong spots! Plenty of green in AZ too
1. Granite Basin Lake
2. Hannagan Meadow
3. Greer
4. Mingus
5. Wilhoit
6. Lockett Meadow/SF Peaks
7. Lemmon
8. Dobbins Lookout(even Phoenix can be green)
9. Williams
10. Mogollon
11. North Rim
12. Oak Creek Canyon
13. Old Route 66
13. Crown King
14. Hawley Lake

 

I was just about to ping you, but then I realized it was your post.

Everybody should consider keeping

$12 Slime 1034-A Tire Repair Reamer Plug Kit, Medium Heavy Duty Strings, T Handle Type and Plug Bond, 8 Piece Set

this for $7.51 (or something similar) in their truck right now! Replacement plugs

$8 Slime 1031-A Tire Repair Plug Pack, Standard Heavy Duty Strings, for tubeless Off-Road Tires, Such as ATVS, wheelbarrows, Lawn mowers, Trailers, Pack of 30

here.

 

Yes sir

 

Having some fun on this thing

 

Yeah when hitting bumps or imperfections in the road at low speeds I hear it.. lifted the truck and took the tires off and realized it was the sway bar end link on my drivers side that came undone. It’s about 4 threads loose and won’t tighten or come off.

 

Have you taken the sway bar off and driven yet? Pls lemme know how it goes.

 

Awesome speakers, that is what I have and they thump even with the OEM radio. In the middle of upgrading the rest of the system right now, I should be done today finally

 

Yesterday started the rest of my sound system install. Ran all my wires (speakers, power, etc) and fabricated my Amp rack and pre-installed it. I should be able to finish today......Inshallah

 

Beautiful sceneries!

Thank you.

 

That’s clean and your system is going to knock.

 

Filled up gas tank yesterday…

 

I guess you will be eating ramen noodles today lol

 

Meso Total Tails stage 1 and also put in VLEDS license plate bulbs to rid the rear end of all halogen

vleds on left, stock on right. Glare is kept in check with the reducer plates


Stage 1s with vleds license plate bulbs


Mmmmm bathed in amber

 

Finishing up my Stereo Upgrade install and the wife is making flower beds, beautiful day out!

 

Soldered a momentary switch to a garage door opener, kind of half-assed it because of time. Didn't take pics until the end and need to go back to wire the switch to come on with the dash lights. I ordered a 12v - 3v step down that I'm going to add to eliminate the battery, so that's a future mod too. I also swapped out the interior lightbulbs for led.

 

I’m out in Arizona for another week. Love the triple digit temps. Driving up to the Grand Canyon tomorrow. No rain and blue sky, what not to like.

 

https://www.tacomaworld.com/threads/plug-and-play-switch-illumination-harnesses.697269/

I use the cargo light harness for switch illumination. I’m over adding add a fuses and much cleaner. Also use the ect harness for center switches.

 

Oh nice, I like that a lot. Question though, I'm also going to be adding add the rock light hardness from DSIM that uses the cargo light harness as well. Any opinion on whether stacking both inline would be bad? In my head, the plugs would match up but just because they fit together doesn't necessarily mean it's a good idea.

ETA....sorry, I just realized you're not the one making those harnesses, I may ask the same in that thread.

 

I put the rack and tent back on for the season Friday, does that count?

 

I would think you could stack them.
The rock lights are using a separate power source. Just using the switch as a controller